# activation switch controlling with 5v dc voltage

**URL:** <https://community.electricforum.com/t/activation-switch-controlling-with-5v-dc-voltage/13106>\
**Category:** Technical Discussions\
**Created:** [December 6, 2017, 12:53pm UTC](https://community.electricforum.com/t/activation-switch-controlling-with-5v-dc-voltage/13106 "2017-12-06T12:53:18Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![alea89](https://avatars.discourse-cdn.com/v4/letter/a/a9adbd/32.png) [@alea89](https://community.electricforum.com/u/alea89)\
**Post date:** [December 6, 2017, 12:53pm UTC](https://community.electricforum.com/t/activation-switch-controlling-with-5v-dc-voltage/13106/1 "2017-12-06T12:53:18Z")

</div>

Hello,I have basic circuit project and it has a small problem in this project.You can think a basic switch.First,switch in open case.If 5v dc voltage comes to switch,Then,The switch should close.How can i do it?Thanks.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 6, 2017, 8:43pm UTC](https://community.electricforum.com/t/activation-switch-controlling-with-5v-dc-voltage/13106/2 "2017-12-06T20:43:13Z")

</div>

You describe a relay.  
Use a 5vdc relay, an fet or bi-polar npn transistor.  
Can you draw a picture of circuit in and out?  
Source current available and load current needed.  
Also if you need isolation, or both circuits use the same common “ground”.

---

<div class="post-metadata">

**Author:** ![kenington3](https://avatars.discourse-cdn.com/v4/letter/k/65b543/32.png) [@kenington3](https://community.electricforum.com/u/kenington3)\
**Post date:** [December 23, 2017, 2:16am UTC](https://community.electricforum.com/t/activation-switch-controlling-with-5v-dc-voltage/13106/3 "2017-12-23T02:16:20Z")

</div>

Yeah, a picture or graph would be nice to describe or suggest.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 23, 2017, 3:03am UTC](https://community.electricforum.com/t/activation-switch-controlling-with-5v-dc-voltage/13106/4 "2017-12-23T03:03:17Z")

</div>

Such a broad request. Is it a real project or a general question?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 23, 2017, 10:52am UTC](https://community.electricforum.com/t/activation-switch-controlling-with-5v-dc-voltage/13106/5 "2017-12-23T10:52:55Z")

</div>

2 in one:  
5v controlling 12v  
12v controlling 9v

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/6e875b4164b07e2ccd99165b0f61050540a1d980.jpg)

---

<div class="post-metadata">

**Author:** ![kenington3](https://avatars.discourse-cdn.com/v4/letter/k/65b543/32.png) [@kenington3](https://community.electricforum.com/u/kenington3)\
**Post date:** [December 23, 2017, 2:43pm UTC](https://community.electricforum.com/t/activation-switch-controlling-with-5v-dc-voltage/13106/6 "2017-12-23T14:43:11Z")

</div>

Looking solid and reliable. Thanks!
