# Access Think motor and controller?

**URL:** <https://community.electricforum.com/t/access-think-motor-and-controller/19568>\
**Category:** Ford NEVs\
**Created:** [August 5, 2020, 1:51pm UTC](https://community.electricforum.com/t/access-think-motor-and-controller/19568 "2020-08-05T13:51:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Thinker56](https://avatars.discourse-cdn.com/v4/letter/t/a87d85/32.png) [@Thinker56](https://community.electricforum.com/u/Thinker56)\
**Post date:** [August 5, 2020, 1:51pm UTC](https://community.electricforum.com/t/access-think-motor-and-controller/19568/1 "2020-08-05T13:51:10Z")

</div>

What’s the best way to access the Think Motor and controller? Looks difficult from underneath. Seems better from the top, if trunk and Panel under rear seat could be removed but several parts seem to be riveted in. Is there an easy way to do this?

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [October 1, 2020, 2:00pm UTC](https://community.electricforum.com/t/access-think-motor-and-controller/19568/2 "2020-10-01T14:00:37Z")

</div>

I always remove from underneath and it’s not as bad as it looks. You can always remove the trunk but that is more work than it’s worth in my eyes.