# 98 gem trans 2 48v

**URL:** <https://community.electricforum.com/t/98-gem-trans-2-48v/12378>\
**Category:** GEM Forum\
**Created:** [May 17, 2017, 6:02pm UTC](https://community.electricforum.com/t/98-gem-trans-2-48v/12378 "2017-05-17T18:02:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@Johnny240](https://community.electricforum.com/u/Johnny240)\
**Post date:** [May 17, 2017, 6:02pm UTC](https://community.electricforum.com/t/98-gem-trans-2-48v/12378/1 "2017-05-17T18:02:08Z")

</div>

Im getting 48v to the cart. The motor is good but the solenoid just clicks and cart doesnt move. I need some help getting this turd going again

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [May 17, 2017, 10:14pm UTC](https://community.electricforum.com/t/98-gem-trans-2-48v/12378/2 "2017-05-17T22:14:31Z")

</div>

What model controller? Is it a Curtus? putting money into a 48 volt GEM is not a great idea.

Rodney

---

<div class="post-metadata">

**Author:** ![Johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@Johnny240](https://community.electricforum.com/u/Johnny240)\
**Post date:** [May 18, 2017, 1:33am UTC](https://community.electricforum.com/t/98-gem-trans-2-48v/12378/3 "2017-05-18T01:33:10Z")

</div>

Yes curtis 1204-401 i jumped pin 1 to the positive on controller and it finally moves. That wire goes to the key switch right?
