# 48v trans 2 battery installation

**URL:** <https://community.electricforum.com/t/48v-trans-2-battery-installation/12054>\
**Category:** GEM Forum\
**Created:** [February 13, 2017, 3:58am UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054 "2017-02-13T03:58:18Z")\
**Posts on this page:** 10\
**Page:** 2

<div class="post-metadata">

**Author:** ![Johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@Johnny240](https://community.electricforum.com/u/Johnny240)\
**Post date:** [February 15, 2017, 4:34pm UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/21 "2017-02-15T16:34:22Z")

</div>

It is a 1204 curtis.ok im going to try it now. the beep only does it in one direction and i cant tell which way is forward and reverse

---

<div class="post-metadata">

**Author:** ![Johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@Johnny240](https://community.electricforum.com/u/Johnny240)\
**Post date:** [February 16, 2017, 8:04pm UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/22 "2017-02-16T20:04:59Z")

</div>

It reads 40 volts. I checked the batterys and 2 were a little low. What now?

---

<div class="post-metadata">

**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\
**Post date:** [February 16, 2017, 9:12pm UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/23 "2017-02-16T21:12:38Z")

</div>

Hi  
are 2 battery bad ? can you try charge with 12volt car charger individually one by one battery

---

<div class="post-metadata">

**Author:** ![Johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@Johnny240](https://community.electricforum.com/u/Johnny240)\
**Post date:** [February 16, 2017, 9:23pm UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/24 "2017-02-16T21:23:39Z")

</div>

I have fully charged all the batteries with the wall charger and it still does the same thing

---

<div class="post-metadata">

**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\
**Post date:** [February 16, 2017, 9:36pm UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/25 "2017-02-16T21:36:56Z")

</div>

Ok are 2 bad battery only 9-10 volt ?  
maybe something wrong with them bad cell or so

40volt are that on pin1 or on total pack voltage ?

---

<div class="post-metadata">

**Author:** ![Johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@Johnny240](https://community.electricforum.com/u/Johnny240)\
**Post date:** [February 16, 2017, 9:40pm UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/26 "2017-02-16T21:40:58Z")

</div>

But shouldnt the tire atleast try to move even on a jack stand

---

<div class="post-metadata">

**Author:** ![Johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@Johnny240](https://community.electricforum.com/u/Johnny240)\
**Post date:** [February 16, 2017, 9:47pm UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/27 "2017-02-16T21:47:10Z")

</div>

I could have not done it right i put the red on pin1 and the black to the main relay. Is this right?

---

<div class="post-metadata">

**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\
**Post date:** [February 17, 2017, 5:25pm UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/28 "2017-02-17T17:25:45Z")

</div>

Hi  
maybe you have one broken part,need first to control test main contactor,throttle,forward reverse relay

---

<div class="post-metadata">

**Author:** ![Johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@Johnny240](https://community.electricforum.com/u/Johnny240)\
**Post date:** [March 7, 2017, 12:46am UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/29 "2017-03-07T00:46:13Z")

</div>

I have no idea how to test it though. Were do i put the leads to

---

<div class="post-metadata">

**Author:** ![Johnny240](https://avatars.discourse-cdn.com/v4/letter/j/2bfe46/32.png) [@Johnny240](https://community.electricforum.com/u/Johnny240)\
**Post date:** [May 16, 2017, 1:14am UTC](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054/30 "2017-05-16T01:14:41Z")

</div>

T he solenoid just clicks. Does that mean its bad?

[Previous page](https://community.electricforum.com/t/48v-trans-2-battery-installation/12054.md?page=1)
