# 30HP Brushless motor upgrade on 2003 GEM

**URL:** <https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761>\
**Category:** GEM Forum\
**Created:** [January 25, 2023, 10:34pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761 "2023-01-25T22:34:10Z")\
**Posts on this page:** 20\
**Page:** 3

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [January 27, 2023, 8:26pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/41 "2023-01-27T20:26:31Z")

</div>

> [@AssyRequired](#):
>
> When does the torque monster start twisting stuff?

Not too worried. Remember that torque is limited by traction and acceleration. Common sense programming and driving will save the day.  
I drive balls to the wall in a little golf cart at 80v.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [January 27, 2023, 11:34pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/42 "2023-01-27T23:34:58Z")

</div>

Its an S4. You removed the rpm cap before you shipped Emmy out here

Bateries are samsung cells. Still havent decided if i want to go 2p14, 15 or 16. I have a higher input voltage dc dc converter. But still havent built the pack. I’m lagging. Just too busy at work.

Gears are stock 17:1. I talked to Rodney some time back, making them 12.44 isnt a problem if i want it.

Still have the stock motor. 7.5hp? 10? Its a fat chunky mofo. Not used in any other gem besides the eM. The other motors are too long to fit…

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [January 28, 2023, 12:40am UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/43 "2023-01-28T00:40:51Z")

</div>

No way, Emmy is 17:1 ? I never would have guessed. Most everything is 12:1

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [January 28, 2023, 12:43am UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/44 "2023-01-28T00:43:19Z")

</div>

Gabe and i have new high speed gearboxes. I wonder? They look just like the new Gems.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [January 28, 2023, 4:35am UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/45 "2023-01-28T04:35:32Z")

</div>

Yep, 17:1 factory on all eM1400s ever produced. That part of the design never changed. 9500 rpm max on the motor, but they capped that at like 6500 or 7k to keep it on the stock 22" tires at about 25mph.

With that 17:1 Emmy is a tough ass bytch. She’s rated for 1200lb trailers on the stock hitch, I’ve moved at least double that weight, all with the old ass worn out original 6V leoch AGM cells. Payload is like 1400, I’m pretty sure I’ve exceeded that, and launched her backwards wtith the dump bed up to unload soil.

I need more room and time, but if I could I kind of want two… Leave Emmy as is with the bed sides, hydraulic dump and full dresser cab, and a skinned one for hooning that is just enough to be street legal: which is a windshield and turn signals. No cab or doors, just hood and windshield, flatbed - no steel sides, no hydraulic dump…

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [January 28, 2023, 1:07pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/46 "2023-01-28T13:07:48Z")

</div>

I wonder if I could get a bogus title for mine, seems just what you need.Oh, no windshield.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [January 28, 2023, 2:52pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/47 "2023-01-28T14:52:21Z")

</div>

The windshield could be added and the vehicle inspected for reclassification from an OHV to street legal. But, in CA they are supposed to be safety glass for anything other than a motorcycle, so that makes the eM windshield almost a $1000 proposition.

---

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [January 28, 2023, 3:45pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/48 "2023-01-28T15:45:45Z")

</div>

> [@JarJarJava](#):
>
> But, in CA they are supposed to be safety glass for anything other than a motorcycle, so that makes the eM windshield almost a $1000 proposition.

And yet I see _Golf Carts_ on the street with plastic windshields all the time… DMV suck much.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [January 28, 2023, 3:57pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/49 "2023-01-28T15:57:58Z")

</div>

> [@JarJarJava](#):
>
> eM windshield almost a $1000 proposition.

Just sold a dmv windshield for the tomberlin for $350.  
Don’t know what would fit. I have a flat windshield frame for a ranger. Well my brother does. From the fire. They mount with flat swrap around straps. Let me look.  
Putting my whole sales force on alert! 🙂

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [January 28, 2023, 4:15pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/50 "2023-01-28T16:15:51Z")

</div>

The roof. and windshield, no glass, is available. Measures the same as Emmy. I think the Tomberlin would have fit too.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [January 28, 2023, 4:23pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/51 "2023-01-28T16:23:22Z")

</div>

> [@dougl](#):
>
> yet I see _Golf Carts_ on the street with plastic windshields all the time… DMV suck much.

I’m sure there are some exceptions, at \<15mph golf carts certainly could be one. “GC” also exists in both the auto and ohv columns, not sure if that plays a factor. And of course the person inspecting is a big variable. It took 2 or 3 people to figure out what they wanted to classify Emmy as when I registered it. One was saying “golf cart”, another was saying “low speed vehicle” and finally after I talked to the supervisor she decided on NEV. (yes, she decided that the US DOT classification might actually be correct… lol)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [January 28, 2023, 4:33pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/52 "2023-01-28T16:33:50Z")

</div>

Hey, put the dot glass on Emmy #2 and substitute for plastic later. After the “accident”.  
🤣 😇 🥰

---

<div class="post-metadata">

**Author:** ![Samwich](https://avatars.discourse-cdn.com/v4/letter/s/dec6dc/32.png) [@Samwich](https://community.electricforum.com/u/Samwich)\
**Post date:** [February 9, 2023, 10:36pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/53 "2023-02-09T22:36:56Z")

</div>

Quick update:  
Did a speed run with a Drag Race app - possibly of interest to @Inwo and @MikeKC.  
The wheel are now 20.5" tall and I swapped the gear box with a 8.9:1 ratio from a 2001 Gem.  
0-30mph in 4.5 s! This motor is fun!  
Max speed of 35 mph, might have a few mph left in her.

 ![2023-02-09 14_32_00-Photo - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/e/ee1e8f218d23433abba6468f5737668addd8a191.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [February 9, 2023, 11:07pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/54 "2023-02-09T23:07:30Z")

</div>

Let me know motor temperature if you sustain 5,000 rpm for more than a short distance.  
That was or limiting factor for rpm.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/5/55121a2f49130c920fc84a5580a3a480b7f5f016.png)

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [February 10, 2023, 12:48am UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/55 "2023-02-10T00:48:36Z")

</div>

Dave what’s up with getting him your 6:1 transmission that would be fun

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [February 10, 2023, 1:10am UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/56 "2023-02-10T01:10:29Z")

</div>

I tried. To fast i guess. 🙂

---

<div class="post-metadata">

**Author:** ![Samwich](https://avatars.discourse-cdn.com/v4/letter/s/dec6dc/32.png) [@Samwich](https://community.electricforum.com/u/Samwich)\
**Post date:** [February 10, 2023, 3:38am UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/57 "2023-02-10T03:38:50Z")

</div>

Let me test out the 8.9:1 some more (once I finish the build) and we’ll see if it makes sense to go to 6:1 😛  
Still have lots to do, here’s where I’m at:

 ![2023-02-09 19_40_26-Photo in GEM car Project - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/1/17d7d0acd3d392ecdba197e230fb7244634398b5.jpeg)  
 ![2023-02-09 19_41_13-Photo in GEM car Project - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/2/2b2f6142954f1fde0d3b5004fdea8c9e990ac6dd.jpeg)  
 ![2023-02-09 19_41_27-Photo in GEM car Project - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/e/e04c815511dc0f0351c0346b1694b291d5fc089b.jpeg)

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [February 11, 2023, 8:04pm UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/58 "2023-02-11T20:04:20Z")

</div>

I never thought a PMAC would or could fit into a Classic Gem we gotta se pics of the motor set up. The PMAC I saw installed was in Troy Hoggard’s 2005 gem and it was a tight fit.

I always thought a 2013 + gem with a 6.1 transmission would make a great project car

---

<div class="post-metadata">

**Author:** ![Samwich](https://avatars.discourse-cdn.com/v4/letter/s/dec6dc/32.png) [@Samwich](https://community.electricforum.com/u/Samwich)\
**Post date:** [March 2, 2023, 4:02am UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/59 "2023-03-02T04:02:05Z")

</div>

Quick update. I’ve been busy building the battery pack.  
I’m using Samsung 33G cells. 20S 30p so roughly 72V 100Ah.  
Pack can do 300A Peak 200A continuous.  
Using a Kweld Spot welder

 ![2023-03-01 19_47_15-Photo - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/d9ceb7e3c97097b0bb74c0ebc80fecbbf3d4f8c3.jpeg)  
Honeycomb Holder  
 ![2023-03-01 19_47_27-Photo - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/a/a586f9f62712b04439df3e4a749b7afc79d8c711.jpeg)  
Copper Bus bar:  
 ![2023-03-01 19_48_05-Photo - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/de0082a8993ac9a765bc82cde47afde5e433df6d.jpeg)  
ANT BMS with display  
 ![2023-03-01 19_48_59-Photo - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/0/0b6bad5bfd2367c7e2b6d1de03c7d6b58fa2f815.jpeg)  
Fabricated steel bracket holder for the case.  
HeatShrink wrapped the back.  
Still need a cover…  
 ![2023-03-01 19_54_40-Photo - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/b/b3bd108ad3ed527cb6affe696c4256f30969fd7d.jpeg)

Battery was a lot of work 2X my previous largest pack.  
Approximately 5000 spot welds!

Might have been better options out there but this was cheap and I had the equipment to build it.

Also finished all the 12V wiring and speaker wiring.  
Just need to paint the body.  
My wife is reupholstering the seats

 ![2023-03-01 19_56_36-Photo in GEM car Project - Google Photos](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/4/4d5e0bb74e9dda532f1a4a612e734160151457fa.jpeg)  
Front seats are next, almost done!

---

<div class="post-metadata">

**Author:** ![grantwest](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/grantwest/32/15_2.png) [@grantwest](https://community.electricforum.com/u/grantwest)\
**Post date:** [March 2, 2023, 6:01am UTC](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761/60 "2023-03-02T06:01:31Z")

</div>

So the car has a 8.1 and it’s going 35,  
In a hurry? Any more up dates. What would 24 inch tires/wheel combo give ya.

[Previous page](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761.md?page=2)

[Next page](https://community.electricforum.com/t/30hp-brushless-motor-upgrade-on-2003-gem/25761.md?page=4)
