# 3 "car" garage? One day **URL:** \ **Category:** GEM Forum\ **Created:** [May 17, 2021, 1:06am UTC](https://community.electricforum.com/t/3-car-garage-one-day/21469 "2021-05-17T01:06:45Z")\ **Posts on this page:** 1\ **Showing post:** 5
**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\ **Post date:** [May 18, 2021, 1:39pm UTC](https://community.electricforum.com/t/3-car-garage-one-day/21469/5 "2021-05-18T13:39:58Z")
I did change them out. QA1 shocks to soften up the ride. The location in the rear is the same. I had to reposition in the front because of the AC motor but am going to put them back when I go back to DC before I sell it. See this thread. Same shocks that @Tyson_Davis used. > [@A little fresh air(shocks) never hurt anybody](https://community.electricforum.com/t/a-little-fresh-air-shocks-never-hurt-anybody/14486/147): > > UPDATE OK so I called QA1 Shocks and went the expensive route to get the correct shocks for my 2002 4 seater. After giving them all the weights, and measuring the Arm and height we came up with a shock that we both thought would work. I purchased (4) QA1-8243 Shock, 82 Series, 4 in. Stroke, 13.75 in./9.38 in., Extended/Collapsed, Number 3/3, Compression/Rebound, Each For the Front spring I purchased (2) QA1-8S180 Coilover Spring, Silver Powdercoated, 1.875 in. Inside Diameter, 8 in. Length… --- _[View the full topic](https://community.electricforum.com/t/3-car-garage-one-day/21469)._