# 22 e6 NOGO issue

**URL:** <https://community.electricforum.com/t/22-e6-nogo-issue/27834>\
**Category:** GEM Forum\
**Created:** [May 19, 2024, 4:07am UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834 "2024-05-19T04:07:36Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [May 19, 2024, 4:07am UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/1 "2024-05-19T04:07:36Z")

</div>

I have a 22 e6. Ive checked the battery, sits at 43.6 v  
Charges fine A57 it reads on the zivan  
Changed the battery on under the dash, it’ll only move about 10ft then acts dead (possibly pulling power from the 12v???)

Dash reads low battery and blinks an empty battery.  
SOC 0%  
What could possibly cause this?

Battery reads that its charged on the volt meter….

I barrowed an e4s ecm/computer I have the same year ect. it didn’t change anything there.

What should I test or check? I can easily barrow a part from its little brother.

Thank you in advance.

 ![IMG_1521](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/0/0b8331eb45175e87b1356c6abe79c3c4a7972c7f.jpeg)  
 ![IMG_1529](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/1/10364960e3ac04700d1e4816399d044a908c944d.jpeg)

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [May 19, 2024, 4:22am UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/2 "2024-05-19T04:22:44Z")

</div>

I am not convinced this battery is charging “Fine”

What battery is this, and do you have a way to load test ?  
What is the condition of the battery in little brother?

---

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [May 19, 2024, 5:01am UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/3 "2024-05-19T05:01:39Z")

</div>

I can get photos in the AM.  
I’ll see if I can find a way to load test it also.

Runs fine. Has 2k miles how do I check the health? only difference is it’s 30v and a smaller 15v  
E6 is just one large 45v  
Batteries Al had Cummins logos

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 19, 2024, 5:36pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/4 "2024-05-19T17:36:20Z")

</div>

Charge battery and reset bmc by toggling 12v battery power.  
Full is about 50 volts.  
Does dash light up and display “C” when plugged in?  
What faults are set?

---

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [May 20, 2024, 9:48pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/5 "2024-05-20T21:48:32Z")

</div>

![IMG_1614](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/8/8e837ee7ba9fef4b965f75df1005bcddb119d601.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 20, 2024, 9:54pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/6 "2024-05-20T21:54:16Z")

</div>

I don’t understand your meter reading.

---

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [May 20, 2024, 9:55pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/7 "2024-05-20T21:55:54Z")

</div>

Battery flashes

 ![IMG_1615](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/d7d13e0e8032034810b36369fe84dadf9e1145ab.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 20, 2024, 9:58pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/8 "2024-05-20T21:58:16Z")

</div>

> [@Inwo](#):
>
> I don’t understand your meter reading.

Voltmeter reading can’t be 90vdc

---

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [May 20, 2024, 10:03pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/9 "2024-05-20T22:03:05Z")

</div>

Sorry I had it on AC

 ![IMG_1616](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/1/124e769a2e9b159c1231d1765e2cb7dbf5875c34.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 20, 2024, 10:04pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/10 "2024-05-20T22:04:01Z")

</div>

Need to charge over 49v to reset dash soc.  
Battery is pretty low

---

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [May 21, 2024, 2:51am UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/11 "2024-05-21T02:51:31Z")

</div>

Leave it plugged in? All I have is a simple charger or trailer it to a quick charger.? Should I jump it off the e4 to wake up the battery?

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [May 21, 2024, 4:05am UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/12 "2024-05-21T04:05:12Z")

</div>

> Leave it plugged in? All I have is a simple charger

That is normally the way it is supposed to work. What do you mean by a “simple charger” ?

Plug in the car/charger and verify battery v is going up with your handheld meter.

Also verify on your dash that there is a C that appears next to your SOC bar graph display.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 21, 2024, 1:52pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/13 "2024-05-21T13:52:38Z")

</div>

> [@Ctp93](#):
>
> Leave it plugged in? All I have is a simple charger _???_ or trailer it to a quick charger.? Should I jump it off the e4 to wake up the battery? _NO NO NO_

Stop switching parts! Just charge the car! If it doesn’t charge, that’s the problem.  
Zivan or Delta-Q charger? Are you plugged into 120 or 240vac? Zivan charges at 50+ amps on 240.

---

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [May 21, 2024, 2:06pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/14 "2024-05-21T14:06:39Z")

</div>

Polaris 120 charger

 ![IMG_1529](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/1/10364960e3ac04700d1e4816399d044a908c944d.jpeg)

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [May 21, 2024, 2:42pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/15 "2024-05-21T14:42:17Z")

</div>

Is this the only thing the display is showing?  
-or-  
Is the display cycling through a few different numbers?

With your handheld meter, Measure battery and check if the battery is increasing Voltage.

Is your dash showing anything different?

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [May 25, 2024, 12:54am UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/16 "2024-05-25T00:54:31Z")

</div>

You need a Evse aka j1772 charger otherwise it will just throw error 57

 ![IMG_1096](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/a/a2cfdc092fa2783a2a08e1b1f0138f5e3c9cd4df.jpeg)

---

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [May 26, 2024, 6:01pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/17 "2024-05-26T18:01:57Z")

</div>

not charging… same charge i ordered a j1772 charger

---

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [May 28, 2024, 12:39am UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/18 "2024-05-28T00:39:55Z")

</div>

Ignored the sticker, and then I picked up a charger and tried it out…. Nothing all day. doesn’t even turn the zivan screen on

 ![IMG_1739](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/da4a9d5d9ad4736137883f302656698916909065.jpeg)

---

<div class="post-metadata">

**Author:** ![Ctp93](https://avatars.discourse-cdn.com/v4/letter/c/e9bcb4/32.png) [@Ctp93](https://community.electricforum.com/u/Ctp93)\
**Post date:** [June 20, 2024, 10:59pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/19 "2024-06-20T22:59:48Z")

</div>

Well left a trickle charger on the agm battery to charge.  
Checked the voltage on the large battery it’s at 95 volts. So that took a charge.  
Still says battery low and SOC 0%

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [June 20, 2024, 11:34pm UTC](https://community.electricforum.com/t/22-e6-nogo-issue/27834/20 "2024-06-20T23:34:12Z")

</div>

> [@Inwo](#):
>
> I don’t understand your meter reading.

Voltmeter reading can’t be 90vdc

> Ctp93  
> Sorry I had it on AC

You are doing it again.  
What exactly are you poking at?

[Next page](https://community.electricforum.com/t/22-e6-nogo-issue/27834.md?page=2)
