# 2018 Gem e6 Error Code

**URL:** <https://community.electricforum.com/t/2018-gem-e6-error-code/26388>\
**Category:** GEM Forum\
**Created:** [May 17, 2023, 6:42pm UTC](https://community.electricforum.com/t/2018-gem-e6-error-code/26388 "2023-05-17T18:42:20Z")\
**Posts on this page:** 6\
**Page:** 3

<div class="post-metadata">

**Author:** ![Dalydog](https://avatars.discourse-cdn.com/v4/letter/d/e9c0ed/32.png) [@Dalydog](https://community.electricforum.com/u/Dalydog)\
**Post date:** [May 30, 2023, 4:35pm UTC](https://community.electricforum.com/t/2018-gem-e6-error-code/26388/41 "2023-05-30T16:35:42Z")

</div>

![PXL_20230530_163347086.MP](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/6862e697455fa60fa15a5ab746198324a5f780d7.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 30, 2023, 4:37pm UTC](https://community.electricforum.com/t/2018-gem-e6-error-code/26388/42 "2023-05-30T16:37:11Z")

</div>

> [@djgabriel2004](#):
>
> Check if the relay is bad on the bench

Yes, check it on the bench.  
Cut it open. You can always tape it up after you fix it.

A bosch relay may fit for a test.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/5/5f6989eef6f7f9957ad5c6325a3990697851f48b.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 30, 2023, 4:57pm UTC](https://community.electricforum.com/t/2018-gem-e6-error-code/26388/43 "2023-05-30T16:57:53Z")

</div>

I have a feeling that it’s a Bosch relay inside a wp shell.

---

<div class="post-metadata">

**Author:** ![Dalydog](https://avatars.discourse-cdn.com/v4/letter/d/e9c0ed/32.png) [@Dalydog](https://community.electricforum.com/u/Dalydog)\
**Post date:** [May 30, 2023, 5:54pm UTC](https://community.electricforum.com/t/2018-gem-e6-error-code/26388/44 "2023-05-30T17:54:19Z")

</div>

I haven’t been able to find the exact pin configuration anywhere.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [May 30, 2023, 6:45pm UTC](https://community.electricforum.com/t/2018-gem-e6-error-code/26388/45 "2023-05-30T18:45:56Z")

</div>

> I haven’t been able to find the exact pin configuration anywhere.

I see that. It is an odd one. I’d just use a Standard Bosch cube and make a short pigtail adapter between the two. Either that of re-pin the Gem Plug so a Standard relay fits in there?

You know which two to jump to make the car wake up (the thick ones), But did you measure the other two to see if Keyed Power shows up?

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [June 3, 2023, 4:42am UTC](https://community.electricforum.com/t/2018-gem-e6-error-code/26388/46 "2023-06-03T04:42:09Z")

</div>

I don’t think there will be any issue If you leave it bypassed  
The only reason the relay is there is to change charger algorithm using tap method.  
Imo

[Previous page](https://community.electricforum.com/t/2018-gem-e6-error-code/26388.md?page=2)
