# 2018 E6 as test car!

**URL:** <https://community.electricforum.com/t/2018-e6-as-test-car/30012>\
**Category:** GEM Forum\
**Created:** [December 17, 2025, 6:13am UTC](https://community.electricforum.com/t/2018-e6-as-test-car/30012 "2025-12-17T06:13:55Z")\
**Posts on this page:** 5\
**Page:** 2

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 22, 2025, 5:11pm UTC](https://community.electricforum.com/t/2018-e6-as-test-car/30012/21 "2025-12-22T17:11:11Z")

</div>

Do you have the kit? Or just the motor.

I’ve run the pmac in several carts. The crazy torque makes up for reduced rpm. I believe that the EV place selling them rates them at 6500+ rpm. I haven’t noticed an rpm cap in my high voltage carts. Of course, I suppose the magnets could fly off.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [December 22, 2025, 6:52pm UTC](https://community.electricforum.com/t/2018-e6-as-test-car/30012/22 "2025-12-22T18:52:59Z")

</div>

Just the motor… but I have all types of extra parts I’ve accumulated over the years. I’ve got spare s4/s6 72v controllers, no 48v’s.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 27, 2025, 12:23am UTC](https://community.electricforum.com/t/2018-e6-as-test-car/30012/23 "2025-12-27T00:23:23Z")

</div>

Dave, ever see a PMAC with dual output shafts? Im good with 3.5k rpm but need the crazy torque…

I like making smoked donuts…

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [December 27, 2025, 2:09pm UTC](https://community.electricforum.com/t/2018-e6-as-test-car/30012/24 "2025-12-27T14:09:50Z")

</div>

Not that I recall. They should all do more than 5k rpm.

Pmac or brushless? Encoder type?

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [December 27, 2025, 5:01pm UTC](https://community.electricforum.com/t/2018-e6-as-test-car/30012/25 "2025-12-27T17:01:40Z")

</div>

Still just seeing what is available. Looking for 1500-2k ish rpm wheel speeds. Care less about top end, , just want to blaze tires .

[Previous page](https://community.electricforum.com/t/2018-e6-as-test-car/30012.md?page=1)