# 2017 Project Car

**URL:** <https://community.electricforum.com/t/2017-project-car/17612>\
**Category:** GEM Forum\
**Created:** [November 28, 2019, 1:02am UTC](https://community.electricforum.com/t/2017-project-car/17612 "2019-11-28T01:02:07Z")\
**Posts on this page:** 1\
**Showing post:** 103

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [March 11, 2020, 3:54am UTC](https://community.electricforum.com/t/2017-project-car/17612/103 "2020-03-11T03:54:37Z")

</div>

I don’t know why you have the added red wire. 12v is available on the firewall, drivers side under dash. 3 threaded stud terminal strip.  
Constant and switched 12v + grd.

And no you can’t use that to trigger dci. No “12v switched” until triggered by white plug.  
The key is the only place that I can find 12v from the key.

---

_[View the full topic](https://community.electricforum.com/t/2017-project-car/17612)._