# 2016 GEM E4 error codes

**URL:** <https://community.electricforum.com/t/2016-gem-e4-error-codes/22291>\
**Category:** GEM Forum\
**Created:** [September 4, 2021, 11:21am UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291 "2021-09-04T11:21:39Z")\
**Posts on this page:** 20\
**Page:** 4

<div class="post-metadata">

**Author:** ![Asalom13](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Asalom13](https://community.electricforum.com/u/Asalom13)\
**Post date:** [October 4, 2021, 9:18pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/62 "2021-10-04T21:18:18Z")

</div>

Ok, but this controller model is only made for Gem, isn’t it? So it had to have come from a Gem?

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [October 4, 2021, 9:27pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/63 "2021-10-04T21:27:35Z")

</div>

No, tons of companies use Sevcon’s - The part numbers and model numbers can be different.  
Unless it states it is from Polaris for your model car it will not work.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [October 4, 2021, 9:32pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/64 "2021-10-04T21:32:14Z")

</div>

What won’t work about it?  
Are the comms between it and the user display special?  
Or is it some special coding that they are keeping close?

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [October 4, 2021, 9:34pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/65 "2021-10-04T21:34:42Z")

</div>

All the motor and can bus (charger/BMS/gauge cluster) programming is proprietary to Polaris (maybe some of the hardware).  
We can read some of the settings from a factory controller but most of the data is not reachable.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [October 4, 2021, 10:17pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/66 "2021-10-04T22:17:06Z")

</div>

This one? Not even close to what you need.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/d2d6c64a1195ca278fb8547261626cccffd74e0a.jpeg)

I have this one for sale:  
p/n is 634a44410

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/b/b5aba769088ff23e32e32b046a4330682874f72e.png)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [October 4, 2021, 10:44pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/67 "2021-10-04T22:44:11Z")

</div>

What are your plans for this car? You seem to have the time and knowledge needed to get it running.  
As long as you have no dealer support, I can get you a generic controller that will work, except for speedometer, without all the Polaris crap.  
It needs a little rewiring, but it seems that you have the time.  
Less money than a new controller from Polaris.

---

<div class="post-metadata">

**Author:** ![Asalom13](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Asalom13](https://community.electricforum.com/u/Asalom13)\
**Post date:** [October 4, 2021, 10:53pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/68 "2021-10-04T22:53:09Z")

</div>

Yeah I do have the time and I hope I have the knowledge, it’s a vehicle that I’m trying to fix for my unit to use. I am lacking parts/funding to buy them.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [October 4, 2021, 11:11pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/69 "2021-10-04T23:11:14Z")

</div>

I can help you get it running with one of my controllers. Not sure about how to ship. Actually Korea is where I find surplus Sevcon controllers.

See this:

> [@2016+ Gem controller swap](https://community.electricforum.com/t/2016-gem-controller-swap/21821/88):
>
> I have a 8.91:1 spicer out of my 2000 that you could mess with. Not quite 6:1 but gets you closer.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [October 4, 2021, 11:18pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/70 "2021-10-04T23:18:04Z")

</div>

Take a look at your motor. Most likely 5kw, which is ok, but I’m testing on my 6.5 kw motor.  
So if I program it for 5kw it will be untested.  
I suppose, possibly send it to @Erniea15 for testing, then he would forward it to you.  
Is there a special way for your unit to receive parts? From family or such.

S4 48v Sevcon Gen4 are hard to find low cost.

---

<div class="post-metadata">

**Author:** ![Asalom13](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Asalom13](https://community.electricforum.com/u/Asalom13)\
**Post date:** [October 4, 2021, 11:24pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/71 "2021-10-04T23:24:36Z")

</div>

Ok. Yes it is a 5kw motor. Also the base I’m on has a post office, so it could be sent through USPS. How much would you charge for it?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [October 4, 2021, 11:28pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/72 "2021-10-04T23:28:54Z")

</div>

I need to get input from some of the guys. Like to help you out, but I don’t know if you are a good candidate for the upgraded controller.  
I have a feeling, someone on here will give you a killer deal on an OEM controller. I bricked one of mine and the other one may need to be put back in my 2018 truck.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [October 4, 2021, 11:29pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/73 "2021-10-04T23:29:41Z")

</div>

Does a flat rate domestic USPS box get to you?

---

<div class="post-metadata">

**Author:** ![Asalom13](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Asalom13](https://community.electricforum.com/u/Asalom13)\
**Post date:** [October 4, 2021, 11:31pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/74 "2021-10-04T23:31:50Z")

</div>

Okay no problem I really appreciate your help. And yes flat rate domestic boxes will work.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [October 5, 2021, 12:30am UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/75 "2021-10-05T00:30:56Z")

</div>

That will help a lot in the case controller needs returning.  
I may even be able to lend you a controller for substitution testing.  
Do you do PayPal from an account with proper shipping address?  
I’ll pm you.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [October 5, 2021, 3:18am UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/76 "2021-10-05T03:18:30Z")

</div>

@MikeKC @djgabriel2004  
What way should I go here to be the most help?  
1.Find him an oem 5kw controller?  
2. Sell him a generic controller and harness?  
3. Look for someone else to send/lend him a controller? (With deposit)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [October 5, 2021, 3:37am UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/77 "2021-10-05T03:37:45Z")

</div>

> [@Asalom13](#):
>
> vehicle that I’m trying to fix for my unit

Is 25mph top speed ok the way you will be using the car?

---

<div class="post-metadata">

**Author:** ![Asalom13](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Asalom13](https://community.electricforum.com/u/Asalom13)\
**Post date:** [October 5, 2021, 3:49am UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/78 "2021-10-05T03:49:06Z")

</div>

Yeah 25Mph is perfect

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [October 5, 2021, 3:49am UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/79 "2021-10-05T03:49:20Z")

</div>

If you want to go the OEM route I have a stock controller that came from my 2016. It is already programmed so it should work  
It was running with a 5kW motor

If it doesn’t work in your Gem you can return it.

---

<div class="post-metadata">

**Author:** ![Asalom13](https://avatars.discourse-cdn.com/v4/letter/a/5f8ce5/32.png) [@Asalom13](https://community.electricforum.com/u/Asalom13)\
**Post date:** [October 5, 2021, 4:00am UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/80 "2021-10-05T04:00:12Z")

</div>

That would be great, how much would you want for it?

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [October 5, 2021, 2:49pm UTC](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291/81 "2021-10-05T14:49:05Z")

</div>

$650 shipped  
Feel free to test it and return it if it doesn’t work.  
You pay shipping both ways

[Previous page](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291.md?page=3)

[Next page](https://community.electricforum.com/t/2016-gem-e4-error-codes/22291.md?page=5)
