# 2016 GEM e4 electrical problem

**URL:** <https://community.electricforum.com/t/2016-gem-e4-electrical-problem/25875>\
**Category:** GEM Forum\
**Created:** [February 14, 2023, 4:03am UTC](https://community.electricforum.com/t/2016-gem-e4-electrical-problem/25875 "2023-02-14T04:03:59Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [August 1, 2023, 3:01pm UTC](https://community.electricforum.com/t/2016-gem-e4-electrical-problem/25875/21 "2023-08-01T15:01:01Z")

</div>

You caved?  
I hereby demote you two ranks to D Cell, forced to use a Radio Shack analog meter for 1 year and must sit at the kids table for giving up too easy.

Very disappointing…

---

<div class="post-metadata">

**Author:** ![khoyer](https://avatars.discourse-cdn.com/v4/letter/k/9dc877/32.png) [@khoyer](https://community.electricforum.com/u/khoyer)\
**Post date:** [August 1, 2023, 3:12pm UTC](https://community.electricforum.com/t/2016-gem-e4-electrical-problem/25875/22 "2023-08-01T15:12:26Z")

</div>

Hey, at least I didn’t pay them $300 to fetch the cart and run diagnostics on it. Then they would have added the $85 switch (assuming they actually figured out what was really wrong) and $125/hour labor on top of that.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [August 1, 2023, 3:40pm UTC](https://community.electricforum.com/t/2016-gem-e4-electrical-problem/25875/23 "2023-08-01T15:40:24Z")

</div>

> [@AssyRequired](#):
>
> It sounds like it _could_ be a common 3 position (center OFF). Post a few pics of the front and back of the switch with how the wires are hooked up.

3 position on-on-on. I don’t have a drawing handy.  
Common connects to 1 of 3. F-N-R  
N may only be used for indicator, but as it goes to vcm, who knows.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [August 1, 2023, 3:51pm UTC](https://community.electricforum.com/t/2016-gem-e4-electrical-problem/25875/24 "2023-08-01T15:51:28Z")

</div>

> [@Inwo](#):
>
> 3 position on-on-on. I don’t have a drawing handy

Sounds much like the Gen2 only it is used for DH, DL, and Rev.  
On the '16 cars- What is N used for? Is it a tow setting(freewheel if pushed? or does it have hill hold and restrictive?

[Previous page](https://community.electricforum.com/t/2016-gem-e4-electrical-problem/25875.md?page=1)
