# 2016 E4 High Voltage Conversion in SD

**URL:** <https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098>\
**Category:** GEM Forum\
**Created:** [August 9, 2021, 5:24am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098 "2021-08-09T05:24:51Z")\
**Posts on this page:** 1\
**Showing post:** 72

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 12:19am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/72 "2021-09-06T00:19:13Z")

</div>

ok… got a few to do the last couple steps but need help troubleshooting -

> [@Inwo](#):
>
> Remove relay and plug in a qc jumper, to send battery volts to charger.

 ![PXL_20210905_151002919](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/e/ed5b1cacb00968951abd4e4b288bd70164de6a00.jpeg)

> [@LithiumGods](#):
>
> jump wires 1&2 on the deutsch connector

 ![PXL_20210905_151207358](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/d004f920c800a1e7e58cc9798f1531416de2815b.jpeg)

Wired it up in the back with a Volt Master disconnect / fuse

 ![PXL_20210905_232714000](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/f/f417e4585244ee8f1195eba6809108a036c7af62.jpeg)

Crossed my fingers and popped in the disconnect fuse

 ![PXL_20210905_232751811](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/5/57030c44f5a0cde6fefb8e0ebe3d068f3b39e665.jpeg)

Turned on the BMS, turned on the key… nothing. If i turn the key all the way over (kind of like you’d do to engage the starter in a gas car, the display boots and then I get this -

[![](https://img.youtube.com/vi/H0WHNOOZtkQ/hqdefault.jpg "GEM 2016 hook up troubleshooting") ](https://www.youtube.com/watch?v=H0WHNOOZtkQ)

I’m wondering if somewhere along the way I loosened the key switch circuit? Thoughts?

---

_[View the full topic](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098)._
