# 2016 E4 High Voltage Conversion in SD

**URL:** <https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098>\
**Category:** GEM Forum\
**Created:** [August 9, 2021, 5:24am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098 "2021-08-09T05:24:51Z")\
**Posts on this page:** 20\
**Page:** 6

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:25am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/107 "2021-09-06T03:25:07Z")

</div>

![b6c4319213230853210228bdffb39c76fa95da9f_2_375x500.jpeg](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/67970b11f085252c50bea112d6e84f8f1fa3cc66.jpeg)  
Key wires.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 3:26am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/108 "2021-09-06T03:26:59Z")

</div>

T-tap into it?

 ![PXL_20210906_032637308](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/1/111c284d7da38e10b5cf8abfca60eea649206c32.jpeg)

Nothing exposed on the key switch itself I can easily get to

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:27am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/109 "2021-09-06T03:27:42Z")

</div>

Yes, tap into the switched wire. Blue is maybe not big enough.  
Wires are smaller on one side of plug I guess.  
 ![b6c4319213230853210228bdffb39c76fa95da9f_2_375x500.jpeg](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/67970b11f085252c50bea112d6e84f8f1fa3cc66.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:34am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/110 "2021-09-06T03:34:38Z")

</div>

> [@Erniea15](#):
>
> starts working in the “starter position”,

Still not sure of what you mean. There is an unused starter position #3 spring loaded.  
#2 position is on.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:40am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/111 "2021-09-06T03:40:14Z")

</div>

Hello, still there? …

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [September 6, 2021, 3:41am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/112 "2021-09-06T03:41:13Z")

</div>

This is what I was thinking. It sounds like he may have lost the “home” position (being off).

Find the position you remove the key?  
Then how many clicks forward to ON?  
From Home(OFF) does it also go back one click to ACC?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:42am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/113 "2021-09-06T03:42:29Z")

</div>

I think acc is pos 1.  
In any case only one pos is used. #2

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [September 6, 2021, 3:45am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/114 "2021-09-06T03:45:57Z")

</div>

Yes,

-OFF  
-ACC (also ON)  
-Spring loaded dumb position (doesn’t do anything) I mean it keeps it ON

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:46am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/115 "2021-09-06T03:46:40Z")

</div>

Think I’ll call it a night. We can pick it up tomorrow if you get the relay connected to the key switch.

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [September 6, 2021, 3:47am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/116 "2021-09-06T03:47:58Z")

</div>

> [@Inwo](#):
>
> Run the blue to switched wire rather than to the terminal.  
> Tap into the key switch wire .

Or check the continuity with the multimeter on the key side.  
Flip the key and it should “Beep”

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 3:49am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/117 "2021-09-06T03:49:38Z")

</div>

I’m here… sorry… just trying to make sure I’m doing what we’re thinking. Trying to figure out the switched side between red and orange

This what you had in mind?

 ![PXL_20210906_034855614](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/f/f98a5cdb3e7d0471504c611585d5825a538aa452.jpeg)

I’ll alligator clip to blue.

Also, now that blue is disconnected from the bus bar, the display powers up normally. No solenoid cycling and rebooting.

 ![PXL_20210906_035139877](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/a/a0066e68b8ae865c728067033e142b6aecc828bf.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:51am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/118 "2021-09-06T03:51:51Z")

</div>

Yes, tap is switch from key and stays on with key?  
I see you found a yellow. I didn’t want to wait for Amazon again. 🙂

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:54am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/119 "2021-09-06T03:54:52Z")

</div>

> [@Erniea15](#):
>
> cycling and rebooting.

See if the switched 12v stays on now.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 3:55am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/120 "2021-09-06T03:55:02Z")

</div>

![PXL_20210906_035337096](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/c/cf76ee5ccc81371c08d8ddc15d8d6a3b3ad0c2a3.jpeg)

> [@Inwo](#):
>
> see you found a yellow.

Bought a whole kit 😉

It’s on and nothing wonky. Should I drop the parking brake and see if it will move?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:57am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/121 "2021-09-06T03:57:16Z")

</div>

Look for solid green on Sevcon. Then yes .  
If it faults notice when.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 4:00am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/122 "2021-09-06T04:00:04Z")

</div>

Fyi, Sevcon all need to start in neutral.  
Pb and other safety switches are not connected.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 4:00am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/123 "2021-09-06T04:00:05Z")

</div>

Sevcon isn’t awake. Do I need to complete the circuit with the orange side of the grey wire and hook that up elsewhere. When I go blue to orange with multimeter, it’s hunting

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 4:01am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/124 "2021-09-06T04:01:28Z")

</div>

Not following. You left everything the same except connected the blue to switch?  
Gray wire?

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 4:03am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/125 "2021-09-06T04:03:56Z")

</div>

Yes… Orange on the center post. Blue disconnected from the busbar and alligator clipped to the key tap.

If I take a volt reading from blue to orange with the key on, shouldn’t I get 12 volts?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 4:05am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/126 "2021-09-06T04:05:40Z")

</div>

Yes, orange is minus 12v? Then to blue is 12v.

[Previous page](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098.md?page=5)

[Next page](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098.md?page=7)
