# 2016 E4 High Voltage Conversion in SD

**URL:** <https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098>\
**Category:** GEM Forum\
**Created:** [August 9, 2021, 5:24am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098 "2021-08-09T05:24:51Z")\
**Posts on this page:** 20\
**Page:** 5

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 1:37am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/87 "2021-09-06T01:37:57Z")

</div>

Having trouble finding the key switch wires? Two wire plug on steering column.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 1:38am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/88 "2021-09-06T01:38:00Z")

</div>

Ok… give me a sec. Just threw dinner on the table.

I’ll start with disconnecting everything charger-wise and then move to the key switch

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 1:39am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/89 "2021-09-06T01:39:40Z")

</div>

> [@Inwo](#):
>
> Having trouble finding the key switch wires

These guys?

 ![PXL_20210906_013852373](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/b/b6c4319213230853210228bdffb39c76fa95da9f.jpeg)

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [September 6, 2021, 1:47am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/90 "2021-09-06T01:47:28Z")

</div>

That’s the one that goes to the key switch right?

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 1:48am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/91 "2021-09-06T01:48:07Z")

</div>

> [@Erniea15](#):
>
> I’ll start with disconnecting everything charger-wise

Did this really quick… No change. On to the key switch.

With all the confusion around the CAN speed, wonder if you’re onto something. I have the DVT software, just haven’t gotten around to loading it and playing with it. Maybe I’ll do that tonight. Think the license registration process is manual so I probably wouldn’t hear back until Tues.

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [September 6, 2021, 1:52am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/92 "2021-09-06T01:52:32Z")

</div>

There is always the possibility that o screwed up.  
No matter this issue, you will likely need to make adjustments to your throttle voltages. @djgabriel2004 knows the pan.  
If you can get DVT running it would likely be beneficial.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 1:57am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/93 "2021-09-06T01:57:37Z")

</div>

We can work around any controller communication issues. I think.  
If we get the controller relay to stay engaged, then the converter to stay powered, should run.  
Unless we lose throttle 5v somewhere.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 1:58am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/94 "2021-09-06T01:58:54Z")

</div>

> [@Erniea15](#):
>
> These guys?

Simple on off from your aux battery. Start there.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 2:08am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/95 "2021-09-06T02:08:03Z")

</div>

> [@djgabriel2004](#):
>
> That’s the one that goes to the key switch right?

Is your car running with same connections as @Erniea15 ?  
Did you need to tie into switch?

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 2:14am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/96 "2021-09-06T02:14:48Z")

</div>

Just to make sure I’m following, do you want me to change the poles on the bus bar to constant power?

 ![PXL_20210904_011759112](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/0/01326577d844fd299b2133f3ad2140bbf2ff8635.jpeg)

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [September 6, 2021, 2:28am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/97 "2021-09-06T02:28:18Z")

</div>

> [@Inwo](#):
>
> Is your car running with same connections as @Erniea15 ?  
> Did you need to tie into switch?

Yes same as @Erniea15

Ive got confused with the 2 key position, mine has OFF and ACC. Then it has like the cars for “ignition” but this position is dumb (at least in mine)

In my case I connnected it to the switched side of the busbar that somehow is backwards (switched 12v on the drivers side. Ground in the middle and +12 constant on the passenger side of the bus bar)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 2:34am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/98 "2021-09-06T02:34:07Z")

</div>

> [@Erniea15](#):
>
> bus bar to constant power?

Imo, connect it to the key. After testing key switch.

---

<div class="post-metadata">

**Author:** ![djgabriel2004](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/djgabriel2004/32/12304_2.png) [@djgabriel2004](https://community.electricforum.com/u/djgabriel2004)\
**Post date:** [September 6, 2021, 2:40am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/99 "2021-09-06T02:40:09Z")

</div>

My car.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/a/a2f933b910b05996fcca3cd59e63f504652431eb.jpeg)

But seems like it’s backwards. In my case this is the 12v switched.

I think dave wants you to bypass the key as well.

Key act as a switch so one of the poles should be 12v constant. Right Dave?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 2:42am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/100 "2021-09-06T02:42:19Z")

</div>

Yes, connect controller relay coil to key switch. Then key will turn off controller.  
The terminals do not come from the key.  
Switched 12v terminal comes from dc converter and is controlled by vcm.  
Charging the car turns this on also.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 2:48am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/101 "2021-09-06T02:48:11Z")

</div>

Ok… let me dig in. Will take pics to make sure I’m connecting the right things.

Installing DVT now… was worried it was on a CD. That would have presented another problem…USB drive thank goodness

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 2:49am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/102 "2021-09-06T02:49:40Z")

</div>

If you don’t have a licence, dvt won’t help.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 2:51am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/103 "2021-09-06T02:51:19Z")

</div>

I bought one from thunderstruck. Just need to go through their process of getting the key. Seems manual so I doubt I’ll hear back until Tuesday

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 2:52am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/104 "2021-09-06T02:52:17Z")

</div>

That’s what I’m saying. Why do dvt now? Are we done for the night?

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 6, 2021, 3:16am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/105 "2021-09-06T03:16:14Z")

</div>

Oh no… was just doing while waiting for the responses.

 ![PXL_20210906_031733621](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/2/27f2547a78796628c14fafe78d67f650b9abe574.jpeg)

Ok… now that I’m seeing it’s just 2 wires going in and it starts working in the “starter position”, thinking it’s the switch. How should I do this, figure out which is power after the key, cut it and run to the blue wire in the grey coil pair?

Ps… I can tinker as last as you’re willing to stay up.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 6, 2021, 3:20am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/106 "2021-09-06T03:20:39Z")

</div>

Are you sure switch isn’t working.  
Don’t cut a wire. Run the blue to switched wire rather than to the terminal.  
Tap into the key switch wire .  
Did car run? Then switch is working.

[Previous page](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098.md?page=4)

[Next page](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098.md?page=6)
