# 2016 E4 High Voltage Conversion in SD

**URL:** <https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098>\
**Category:** GEM Forum\
**Created:** [August 9, 2021, 5:24am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098 "2021-08-09T05:24:51Z")\
**Posts on this page:** 20\
**Page:** 10

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 7, 2021, 11:41pm UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/187 "2021-09-07T23:41:03Z")

</div>

Object list to view data in locations shown in your fault screen shot.  
Made with “neat office”.

> **[Items Shared on 9-7-2021](https://onedrive.live.com/redir?resid=323E905B6100A476%212863&authkey=%21AK8jdnceHK6jnYY&e=aUBzjx)**
>
> Folder

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 7, 2021, 11:43pm UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/188 "2021-09-07T23:43:11Z")

</div>

> [@MaxAtMaxMarine](#):
>
> purple Delphi connector

Yes, should see data activity on 250 baud.

Ernie, do you need an interface to Polaris programming port? Delphi connector and db9.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 7, 2021, 11:45pm UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/189 "2021-09-07T23:45:21Z")

</div>

> [@Erniea15](#):
>
> don’t have everything talking yet

On the bench need termination resistor or jumper 2-24  
Power to p1 and B- is all that’s needed.  
Mike may have it on 500 baud

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:00am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/190 "2021-09-08T00:00:34Z")

</div>

![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/9/9f9c1203d7b43a02ba462adaf23fda7c9055e3db.png)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:10am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/191 "2021-09-08T00:10:49Z")

</div>

![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/0/0f19a8c7384f083de5dbbedd0bc454afda076964.png)

I doubt your checksum stayed the same. I usually make some changes.

This is the garnt dcf

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 8, 2021, 12:11am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/192 "2021-09-08T00:11:06Z")

</div>

I’m getting data… Let me play around with app for a sec and see what I can figure out

> [@Inwo](#):
>
> do you need an interface to Polaris programming port? Delphi connector and db9.

If you’ve got one, that might be cleaner

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:13am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/193 "2021-09-08T00:13:20Z")

</div>

Click the big “H” top row.

then “battery limits”

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/c/cf5bdbb33c234b5058f3061278b8930edc3d1a6a.png)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:14am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/194 "2021-09-08T00:14:50Z")

</div>

baseline profile in garnt dcf  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/4/401ba9df613efa707d0f6a8bfab53e01d616b517.png)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:16am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/195 "2021-09-08T00:16:09Z")

</div>

voltage cutback

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/2/2884822dce04a8bdb0e4c03545a0c62cc8da6d4e.png)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:18am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/196 "2021-09-08T00:18:31Z")

</div>

Do not change anything.  
Save dcf

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:21am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/197 "2021-09-08T00:21:36Z")

</div>

Grant may be using a S6 controller.  
I would have reduced current to hw limits of S4. 350a or possibly 400a

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/3/3d876b100d5e34be079592329c430a3e97c63bea.png)

S4=350a  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/7/73322ea5f6cb53b06ed291927a0c50fd8128f1a2.png)

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 8, 2021, 12:26am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/198 "2021-09-08T00:26:20Z")

</div>

Generation eds… Almost caught up

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 8, 2021, 12:34am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/199 "2021-09-08T00:34:59Z")

</div>

Did you want screen shots of all those settings??

 ![PXL_20210908_002859409](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/e/edee7e07fa9acb064e23898f932f4fa6c640b18d.jpeg)

 ![PXL_20210908_002940284](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/e/e0da52f292e770ed8ed2a42325e0000ea8ab1454.jpeg)

 ![PXL_20210908_003102110](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/4/4416aae8a1d391f4bbdc6eea50018da1a0e61e43.jpeg)

 ![PXL_20210908_003235532](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/a/aff61e972b8e8d8b4573668cf0fc485278f97f43.jpeg)

 ![PXL_20210908_003258421](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/a/a50447c7cfe4fb33d49ceeb203f3f52a5e2f3412.jpeg)

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:37am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/200 "2021-09-08T00:37:15Z")

</div>

No, they are for you to compare. Just to see if we are on the same dcf.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 8, 2021, 12:37am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/201 "2021-09-08T00:37:48Z")

</div>

Let me check one more time but it all seemed to match

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:39am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/202 "2021-09-08T00:39:11Z")

</div>

The checksum will change, I assume, if I make a minor change. Never looked at it previous.  
Which controller?

@MikeKC help!

I can delete these later. I don’t see a problem posting.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 8, 2021, 12:41am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/203 "2021-09-08T00:41:13Z")

</div>

Ok… all settings match. I’m looking at the Steve controller. Check sums match too.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [September 8, 2021, 12:43am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/204 "2021-09-08T00:43:52Z")

</div>

The controller Mike programmed may be optimized. He has done more s4 than myself.  
We want to know why it didn’t run too.

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 8, 2021, 12:44am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/205 "2021-09-08T00:44:03Z")

</div>

Ps. I could also setup a WebEx or teams meeting and give you or mike control of the laptop

---

<div class="post-metadata">

**Author:** ![Erniea15](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/erniea15/32/10887_2.png) [@Erniea15](https://community.electricforum.com/u/Erniea15)\
**Post date:** [September 8, 2021, 12:45am UTC](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098/206 "2021-09-08T00:45:15Z")

</div>

> [@Inwo](#):
>
> The controller Mike programmed may be optimized. He has done more s4 than myself.

Do we just need to change the baud speed?

[Previous page](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098.md?page=9)

[Next page](https://community.electricforum.com/t/2016-e4-high-voltage-conversion-in-sd/22098.md?page=11)
