# 2015 GEM e6 keeps stalling

**URL:** <https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324>\
**Category:** GEM Forum\
**Created:** [March 18, 2020, 11:50pm UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324 "2020-03-18T23:50:27Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [March 18, 2020, 11:50pm UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/1 "2020-03-18T23:50:28Z")

</div>

GEM stalls randomly for a few seconds. Lately I turn key to off and wait a few seconds and starts again. Checked all battery connections all tight and clean. Also checked the connection from controller to motor and retighten the connections. I noticed that the charger warning light intermittently flashes. I use the GEM almost everyday for trips around the neighborhood and always place to charge overnight.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [March 19, 2020, 12:19am UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/2 "2020-03-19T00:19:55Z")

</div>

Key switch failure is common.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [March 19, 2020, 12:50am UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/3 "2020-03-19T00:50:22Z")

</div>

Does 11 code flash when it stalls?

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [March 19, 2020, 1:27am UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/4 "2020-03-19T01:27:58Z")

</div>

Is there a way to check.

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [March 19, 2020, 1:28am UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/5 "2020-03-19T01:28:26Z")

</div>

No code just goes blank.

---

<div class="post-metadata">

**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\
**Post date:** [March 19, 2020, 1:53am UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/6 "2020-03-19T01:53:22Z")

</div>

Our sympathy’s You are the unfortunate owner of an intermittent bad/broken connection joint or switch. You have been given the opportunity to shake a lot of wires, jiggle a lot of terminals, practice and maybe increase your vocabulary of colorful expletives and in the end be a better man for the exercise.

Start with the parking brake switch and connections and go from there. Be sure to get back with us when you find it.

I had this situation on my present build. In the end i had to change the complete harness.

In a message dated 3/18/2020 9:38:37 PM Eastern Standard Time, [electricforum@discoursemail.com](mailto:electricforum@discoursemail.com) writes:

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [March 19, 2020, 4:00am UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/7 "2020-03-19T04:00:12Z")

</div>

> [@earami](#):
>
> way to check?

Remove any extra keys on ring. See if switch is touchy when motoring.

---

<div class="post-metadata">

**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\
**Post date:** [March 19, 2020, 3:50pm UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/8 "2020-03-19T15:50:18Z")

</div>

Hi  
if car stall you have sound from parking brake summer ?  
or totally dead ?  
can be your dc/dc have problem,maybe water inside charger will get that problem

---

<div class="post-metadata">

**Author:** ![earami](https://avatars.discourse-cdn.com/v4/letter/e/ed8c4c/32.png) [@earami](https://community.electricforum.com/u/earami)\
**Post date:** [March 19, 2020, 7:17pm UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/9 "2020-03-19T19:17:30Z")

</div>

Yes there is still sound similar when you take key out and don’t lift the parking brake.

---

<div class="post-metadata">

**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\
**Post date:** [March 19, 2020, 9:34pm UTC](https://community.electricforum.com/t/2015-gem-e6-keeps-stalling/18324/10 "2020-03-19T21:34:27Z")

</div>

ok it can be a key problem
