# 2015 e6 change algorithm to agm **URL:** \ **Category:** GEM Forum\ **Created:** [July 1, 2025, 5:09pm UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366 "2025-07-01T17:09:39Z")\ **Posts on this page:** 9\ **Page:** 2
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 12, 2025, 9:28am UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366/21 "2025-07-12T09:28:16Z")
Tbh, flooded profile works fine for agm. Gel setting will kill agm in a few months. This from @Old_Houseboater , iirc. The only issue is failure to show “finished” after a full charge cycle. ---
**Author:** ![gofast67](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@gofast67](https://community.electricforum.com/u/gofast67)\ **Post date:** [July 12, 2025, 1:20pm UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366/22 "2025-07-12T13:20:06Z")
So it will charge at this flooded rate,but it doesn’t show them fully charged when completed. I also replied about what I see when connected to the charger. It has several gel settings, and 1 flooded setting. I can remove them,but can’t add to it ---
**Author:** ![gofast67](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@gofast67](https://community.electricforum.com/u/gofast67)\ **Post date:** [July 12, 2025, 1:22pm UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366/23 "2025-07-12T13:22:28Z")
Sir,I responded to your question several days ago. It shows 6 profiles most are gel deka,and 1 or 2 flooded algorithms. Do you want an actual picture of my screen or what? I can tell you that these algorithms are definitely from gem car. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 12, 2025, 2:56pm UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366/24 "2025-07-12T14:56:50Z")
Doh! Yes he does! What good is saying 6 profiles. They all show that. > [@gofast67](#): > > Do you want an actual picture of my screen or what? This is why he gets frustrated. ---
**Author:** ![gofast67](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@gofast67](https://community.electricforum.com/u/gofast67)\ **Post date:** [July 12, 2025, 3:44pm UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366/25 "2025-07-12T15:44:33Z")
![Screenshot_20250712_114310_Chrome](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/c/6/c6fc7881afa60200c9927a17ac29679ec0a9c38d.jpeg) This is exactly what is in this charger ---
**Author:** ![gofast67](https://avatars.discourse-cdn.com/v4/letter/g/977dab/32.png) [@gofast67](https://community.electricforum.com/u/gofast67)\ **Post date:** [July 12, 2025, 3:45pm UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366/26 "2025-07-12T15:45:36Z")
![Screenshot_20250712_114310_Chrome](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/3X/c/6/c6fc7881afa60200c9927a17ac29679ec0a9c38d.jpeg) I sent to him also. This is exactly what is in the charger. My computer shows exactly the same thing ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 12, 2025, 4:51pm UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366/27 "2025-07-12T16:51:45Z")
Not helpful. I thought you had a programmer. No? I doubt we’ll hear from Byron again. He has less patience than me. Are you deliberately being dense? There is much more information needed than the manual. ☹ > [@AssyRequired](#): > > I actually have the quiq usb interface module, ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 12, 2025, 4:53pm UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366/28 "2025-07-12T16:53:05Z")
---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 13, 2025, 3:19pm UTC](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366/29 "2025-07-13T15:19:43Z")
[Previous page](https://community.electricforum.com/t/2015-e6-change-algorithm-to-agm/29366.md?page=1)