# 2014 Gem **URL:** \ **Category:** Uncategorized\ **Created:** [December 22, 2018, 7:24pm UTC](https://community.electricforum.com/t/2014-gem/15128 "2018-12-22T19:24:28Z")\ **Posts on this page:** 20\ **Page:** 5
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 3, 2019, 4:52pm UTC](https://community.electricforum.com/t/2014-gem/15128/81 "2019-01-03T16:52:51Z")
![MVC-001F](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/6f5812beb1dbd0d104200ab93188d9124f4531a9.jpeg) ![MVC-002F](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/6711036042caa4560537e323762846107c7d1b5a.jpeg) 3’ x 3’ x 16" pallet. 6 x 10s modules end plates Copper flex bars Nuts for studs ---
**Author:** ![chris1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/32/3300_2.png) [@chris1](https://community.electricforum.com/u/chris1)\ **Post date:** [January 3, 2019, 11:57pm UTC](https://community.electricforum.com/t/2014-gem/15128/82 "2019-01-03T23:57:12Z")
And a partridge in a pear tree! Freight carrier should have called late today or will call tomorrow morning. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 4, 2019, 6:32pm UTC](https://community.electricforum.com/t/2014-gem/15128/83 "2019-01-04T18:32:34Z")
Call me or 7Rivers? BOL goes to? ---
**Author:** ![chris1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/32/3300_2.png) [@chris1](https://community.electricforum.com/u/chris1)\ **Post date:** [January 4, 2019, 10:05pm UTC](https://community.electricforum.com/t/2014-gem/15128/84 "2019-01-04T22:05:03Z")
I think it’s all set, At least that’s what I’m told from this morning. What is BOL? Momentary or latching switch for the BMS? ---
**Author:** ![chris1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/32/3300_2.png) [@chris1](https://community.electricforum.com/u/chris1)\ **Post date:** [January 4, 2019, 10:07pm UTC](https://community.electricforum.com/t/2014-gem/15128/85 "2019-01-04T22:07:14Z")
Sorry, bill of lading. Astro masonry and supply attention \*\*\*\*\*\*. He set up the carrier So I guess that should be fine. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 4, 2019, 10:08pm UTC](https://community.electricforum.com/t/2014-gem/15128/86 "2019-01-04T22:08:51Z")
The bol has to be here or trucker won’t take it. > **···** > > **From:** chris1 > > **Sent:** Friday, January 04, 2019 4:07 PM > > **To:** barbjb@acegroup.cc > > **Subject:** [Electric Forum] [PM] 2014 Gem > > ![](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/45/3300_2.png "chris1") > > [chris1](https://community.electricforum.com/u/chris1) > January 4 > Sorry, bill of lading. Astro masonry and supply attention Steve Tripani. He set up the carrier So I guess that should be fine. > > * * * > > [Visit Message](https://community.electricforum.com/t/2014-gem/15128/85) > or reply to this email to respond to [grantwest](https://community.electricforum.com/u/grantwest), [Inwo](https://community.electricforum.com/u/inwo), [kinghappy](https://community.electricforum.com/u/kinghappy), [chris1](https://community.electricforum.com/u/chris1). > > * * * > > #### In Reply To > > ![](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/45/3300_2.png "chris1") > > [chris1](https://community.electricforum.com/u/chris1) > January 4 > I think it’s all set, At least that’s what I’m told from this morning. What is BOL? Momentary or latching switch for the BMS? > > * * * > > [Visit Message](https://community.electricforum.com/t/2014-gem/15128/85) > or reply to this email to respond to [grantwest](https://community.electricforum.com/u/grantwest), [Inwo](https://community.electricforum.com/u/inwo), [kinghappy](https://community.electricforum.com/u/kinghappy), [chris1](https://community.electricforum.com/u/chris1). > > To unsubscribe from these emails, [click here](https://community.electricforum.com/email/unsubscribe/a83f6af16a3e328393cbe19b8a7ddab109f751ca4764cb0882beda3cedd876e4). ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 4, 2019, 10:11pm UTC](https://community.electricforum.com/t/2014-gem/15128/87 "2019-01-04T22:11:10Z")
The bms has power mosfets that the charger connects to. Bms will turn on and off as needed. B- on bms connects to B- C- connects to charger black wire. (neg) Charger red connects to B+. > **···** > > **From:** chris1 > > **Sent:** Friday, January 04, 2019 4:05 PM > > **To:** barbjb@acegroup.cc > > **Subject:** [Electric Forum] [PM] 2014 Gem > > ![](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/45/3300_2.png "chris1") > > [chris1](https://community.electricforum.com/u/chris1) > January 4 > I think it’s all set, At least that’s what I’m told from this morning. > > What is BOL? > > Momentary or latching switch for the BMS? > > * * * > > [Visit Message](https://community.electricforum.com/t/2014-gem/15128/84) > or reply to this email to respond to [grantwest](https://community.electricforum.com/u/grantwest), [Inwo](https://community.electricforum.com/u/inwo), [kinghappy](https://community.electricforum.com/u/kinghappy), [chris1](https://community.electricforum.com/u/chris1). > > To unsubscribe from these emails, [click here](https://community.electricforum.com/email/unsubscribe/9a2de1edf14023b51f0146eb1bb279543387287cf6f402f77b81d3f1ab2ff42c). ---
**Author:** ![chris1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/32/3300_2.png) [@chris1](https://community.electricforum.com/u/chris1)\ **Post date:** [January 4, 2019, 10:23pm UTC](https://community.electricforum.com/t/2014-gem/15128/88 "2019-01-04T22:23:07Z")
ok, checking on the BOL. Do I need a switch for the red arrow? ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/4/4eb63cef3c483d2f05441d4184a6fbebca529867.jpeg) ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 4, 2019, 10:45pm UTC](https://community.electricforum.com/t/2014-gem/15128/89 "2019-01-04T22:45:09Z")
Comes with it. mom. I generally just short the pins if needed. Also a switch on display that can wake up or reset bms. I leave a hole in box for pencil eraser to access switches. Both power and data are wired thru RJ connectors on yours. > **···** > > **From:** chris1 > > **Sent:** Friday, January 04, 2019 4:23 PM > > **To:** barbjb@acegroup.cc > > **Subject:** [Electric Forum] [PM] 2014 Gem > > ![](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/45/3300_2.png "chris1") > > [chris1](https://community.electricforum.com/u/chris1) > January 4 > ok, checking on the BOL. > > Do I need a switch for the red arrow? > ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/4/4eb63cef3c483d2f05441d4184a6fbebca529867.jpeg) > > * * * > > [Visit Message](https://community.electricforum.com/t/2014-gem/15128/88) > or reply to this email to respond to [grantwest](https://community.electricforum.com/u/grantwest), [Inwo](https://community.electricforum.com/u/inwo), [kinghappy](https://community.electricforum.com/u/kinghappy), [chris1](https://community.electricforum.com/u/chris1). > > To unsubscribe from these emails, [click here](https://community.electricforum.com/email/unsubscribe/f44733670ef1610f537b79f64d3e438abc23aedcb8e942f9cedeaec9689d4203). ---
**Author:** ![chris1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/32/3300_2.png) [@chris1](https://community.electricforum.com/u/chris1)\ **Post date:** [January 4, 2019, 11:39pm UTC](https://community.electricforum.com/t/2014-gem/15128/90 "2019-01-04T23:39:38Z")
Excellent, Ill figure it all out once its all in my hands. Project boxes got here today and I was planning on putting the power switch for the bms on the outside of the box but if its only a momentary to wake and the display has the same function its not even needed. ---
**Author:** ![chris1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/32/3300_2.png) [@chris1](https://community.electricforum.com/u/chris1)\ **Post date:** [January 5, 2019, 9:13pm UTC](https://community.electricforum.com/t/2014-gem/15128/91 "2019-01-05T21:13:53Z")
Just got the BMS box…first impression…what did I get myself into. Second look, not that bad. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 5, 2019, 9:23pm UTC](https://community.electricforum.com/t/2014-gem/15128/92 "2019-01-05T21:23:51Z")
I believe that I did a lot of the work for you, no? > **···** > > **From:** chris1 > > **Sent:** Saturday, January 05, 2019 3:14 PM > > **To:** barbjb@acegroup.cc > > **Subject:** [Electric Forum] [PM] 2014 Gem > > ![](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/45/3300_2.png "chris1") > > [chris1](https://community.electricforum.com/u/chris1) > January 5 > Just got the BMS box…first impression…what did I get myself into. Second look, not that bad. > > * * * > > [Visit Message](https://community.electricforum.com/t/2014-gem/15128/91) > or reply to this email to respond to [grantwest](https://community.electricforum.com/u/grantwest), [Inwo](https://community.electricforum.com/u/inwo), [kinghappy](https://community.electricforum.com/u/kinghappy), [chris1](https://community.electricforum.com/u/chris1). > > To unsubscribe from these emails, [click here](https://community.electricforum.com/email/unsubscribe/e8c251943192e2e03ec394c12a12c49349e5db956d714f0bb45dbe2148bf89fd). ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 5, 2019, 9:27pm UTC](https://community.electricforum.com/t/2014-gem/15128/93 "2019-01-05T21:27:32Z")
Michael is shy. 🙂This from him just now: "Look at this bank I pulled 63 amp hours out of it it’s on a 40 amp power draw and each cell with in 14 millivolts " ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/9/9a868f1b756f1a05104133171e8facab0785d546.jpeg) ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 5, 2019, 9:29pm UTC](https://community.electricforum.com/t/2014-gem/15128/94 "2019-01-05T21:29:44Z")
@LithiumGods, if I get another iCharger will you teach me how to use it. What’s this one? Muti-chemistry. > **[Junsi iCharger 4010DUO Multi-Chemistry DC Battery Charger (10S/40A/2000W)...](https://www.ebay.com/itm/Junsi-iCharger-4010DUO-Multi-Chemistry-DC-Battery-Charger-10S-40A-2000W-/253856172692?hash=item3b1b01ca94)** > > Country Of Manufacture: China, People's Republic of. | eBay! ---
**Author:** ![chris1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/32/3300_2.png) [@chris1](https://community.electricforum.com/u/chris1)\ **Post date:** [January 5, 2019, 9:35pm UTC](https://community.electricforum.com/t/2014-gem/15128/95 "2019-01-05T21:35:16Z")
Absolutely! Remember I deal in concrete all day, this is a complete shift for me…Ill be fine, Im already laying out the BMS in the box to mount. ---
**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\ **Post date:** [January 5, 2019, 10:35pm UTC](https://community.electricforum.com/t/2014-gem/15128/96 "2019-01-05T22:35:24Z")
it is the same as the one above except it will do a 10s battery , perfect for you . It will actually do two 10s banks simultaneously . or you can bridge it and it will do 70amps ! This one does not do LTO . The newest one X6 is a 6s and does LTO . If you buy one get it directly from Progressive Rc , Great pricing and they are the master distributor . They do the warranty work and have good tech support . ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 5, 2019, 11:18pm UTC](https://community.electricforum.com/t/2014-gem/15128/97 "2019-01-05T23:18:02Z")
What model is X6 LTO? ---
**Author:** ![chris1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/32/3300_2.png) [@chris1](https://community.electricforum.com/u/chris1)\ **Post date:** [January 5, 2019, 11:53pm UTC](https://community.electricforum.com/t/2014-gem/15128/98 "2019-01-05T23:53:41Z")
The four temp sensors, I’m guessing place them in thermal paste on the top? ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 6, 2019, 12:34am UTC](https://community.electricforum.com/t/2014-gem/15128/99 "2019-01-06T00:34:14Z")
I never use them. ---
**Author:** ![chris1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/chris1/32/3300_2.png) [@chris1](https://community.electricforum.com/u/chris1)\ **Post date:** [January 6, 2019, 12:46am UTC](https://community.electricforum.com/t/2014-gem/15128/100 "2019-01-06T00:46:38Z")
Perfect. Little progress… ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/2/2b3462118f6fd06cc6906ed6250fb7ab52a49c57.jpeg) [Previous page](https://community.electricforum.com/t/2014-gem/15128.md?page=4) [Next page](https://community.electricforum.com/t/2014-gem/15128.md?page=6)