# 2014 e2: New Motor Needed - Best Place To Purchase? **URL:** \ **Category:** GEM Forum\ **Created:** [July 17, 2017, 10:42am UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572 "2017-07-17T10:42:38Z")\ **Posts on this page:** 14\ **Page:** 1
**Author:** ![harva01](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@harva01](https://community.electricforum.com/u/harva01)\ **Post date:** [July 17, 2017, 10:42am UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/1 "2017-07-17T10:42:38Z")
Good morning - my 2014 e2 needs a new electric motor controller (part # 4014222) and my local dealer wants $1100.00 - can anyone offer a better place to order this part from? Many thanks in advance. Mike ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 17, 2017, 1:33pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/2 "2017-07-17T13:33:00Z")
They can be rebuilt for 1/2. What are the symptoms? Error Code? Some are easy fixes. Ie. -66 If no error code, you may need a 2nd opinion before spending that much. I believe that your t5 can be replaced with more common t4 or even t3 ge controller. Fsip can remanufacture it for you. ---
**Author:** ![harva01](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@harva01](https://community.electricforum.com/u/harva01)\ **Post date:** [July 17, 2017, 1:36pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/3 "2017-07-17T13:36:22Z")
57 is the code being displayed…FSIP? ---
**Author:** ![harva01](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@harva01](https://community.electricforum.com/u/harva01)\ **Post date:** [July 17, 2017, 4:27pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/4 "2017-07-17T16:27:35Z")
Located FSIP in PA - thanks - will contact. ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 17, 2017, 4:35pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/5 "2017-07-17T16:35:35Z")
Could be loose wire or battery issue for 57. Are they an experienced dealer? If yes, then it might be controller. ---
**Author:** ![harva01](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@harva01](https://community.electricforum.com/u/harva01)\ **Post date:** [July 17, 2017, 5:34pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/6 "2017-07-17T17:34:21Z")
Three codes were displayed: 51, 57 & 64. After shutting off MDS overnight, then on, cart did move. Now does not move and only displays 57… ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 17, 2017, 8:31pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/7 "2017-07-17T20:31:34Z")
Sounds like low voltage to me. If they look at levels in Sentry monitor sw. It should tell them what’s up. If they are unable. It might be an expensive repair. Only a couple hundred $ for sw and cable. If they work on Gems they need it. ---
**Author:** ![harva01](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@harva01](https://community.electricforum.com/u/harva01)\ **Post date:** [July 17, 2017, 8:34pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/8 "2017-07-17T20:34:22Z")
New GEL batteries and are fully charged… ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 17, 2017, 8:40pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/9 "2017-07-17T20:40:07Z")
Doesn’t mean voltage is good at controller. Don’t get me wrong. They may be very knowledgeable and controller is bad. Seems like a lot of codes for it to have failed. I wonder if they reset the 23p connector? ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 17, 2017, 8:58pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/10 "2017-07-17T20:58:33Z")
[http://www.ltgearshop.com/ltgearshop/t3-and-t4-gem-car-controller-ff80818121faeced01221416b7c51b7b-p.html](http://www.ltgearshop.com/ltgearshop/t3-and-t4-gem-car-controller-ff80818121faeced01221416b7c51b7b-p.html) ---
**Author:** ![harva01](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@harva01](https://community.electricforum.com/u/harva01)\ **Post date:** [July 17, 2017, 9:44pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/11 "2017-07-17T21:44:50Z")
Just pulled the connector off and back on. Code is now 64… ---
**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\ **Post date:** [July 20, 2017, 6:52pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/12 "2017-07-20T18:52:03Z")
if it is the t4 I have a used one with high speed setting so your cart would go about 32 mph instead of 25 . I want $450 for it plus shipping ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [July 20, 2017, 7:25pm UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/13 "2017-07-20T19:25:02Z")
I’ll do $50 for the bad one, I’d like to see what’s inside! ---
**Author:** ![harva01](https://avatars.discourse-cdn.com/v4/letter/h/dbc845/32.png) [@harva01](https://community.electricforum.com/u/harva01)\ **Post date:** [July 21, 2017, 9:51am UTC](https://community.electricforum.com/t/2014-e2-new-motor-needed-best-place-to-purchase/12572/14 "2017-07-21T09:51:30Z")
Thanks to all, particularly Inwo. Controller is w FSIP for re-build.