# 2012 GEM e2 dead dash

**URL:** <https://community.electricforum.com/t/2012-gem-e2-dead-dash/28812>\
**Category:** GEM Forum\
**Created:** [January 24, 2025, 5:25pm UTC](https://community.electricforum.com/t/2012-gem-e2-dead-dash/28812 "2025-01-24T17:25:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Deepercreek](https://avatars.discourse-cdn.com/v4/letter/d/41988e/32.png) [@Deepercreek](https://community.electricforum.com/u/Deepercreek)\
**Post date:** [January 24, 2025, 5:25pm UTC](https://community.electricforum.com/t/2012-gem-e2-dead-dash/28812/1 "2025-01-24T17:25:16Z")

</div>

Bought used. Ran when parked, batts/ cables corroded. Installed new batts and all new cables complete to the dash. Dash is dead. Checked all fuses and checked voltage, all good. What to check next? I ordered a manual and am waiting for it. Any help is appreciated.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [January 24, 2025, 6:13pm UTC](https://community.electricforum.com/t/2012-gem-e2-dead-dash/28812/2 "2025-01-24T18:13:42Z")

</div>

Try not to double post.  
It confuses the he!! out of people. (mainly me)

---

<div class="post-metadata">

**Author:** ![Deepercreek](https://avatars.discourse-cdn.com/v4/letter/d/41988e/32.png) [@Deepercreek](https://community.electricforum.com/u/Deepercreek)\
**Post date:** [January 25, 2025, 12:21am UTC](https://community.electricforum.com/t/2012-gem-e2-dead-dash/28812/3 "2025-01-25T00:21:40Z")

</div>

Sorry, first post and it took a bit for it to be approved