# 2012 E4 Circuit Board

**URL:** <https://community.electricforum.com/t/2012-e4-circuit-board/19962>\
**Category:** Uncategorized\
**Created:** [October 1, 2020, 5:14pm UTC](https://community.electricforum.com/t/2012-e4-circuit-board/19962 "2020-10-01T17:14:24Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![kbw](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@kbw](https://community.electricforum.com/u/kbw)\
**Post date:** [October 1, 2020, 5:14pm UTC](https://community.electricforum.com/t/2012-e4-circuit-board/19962/1 "2020-10-01T17:14:24Z")

</div>

I have a 2012 E4 and am in need of a new controller circuit board  
Anyone out there have one to sell?  
Many thanks

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [October 1, 2020, 6:00pm UTC](https://community.electricforum.com/t/2012-e4-circuit-board/19962/2 "2020-10-01T18:00:51Z")

</div>

I have a whole controller for sale ( several actually) - I don’t think you will find just the circuit board.

---

<div class="post-metadata">

**Author:** ![kbw](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@kbw](https://community.electricforum.com/u/kbw)\
**Post date:** [October 1, 2020, 9:45pm UTC](https://community.electricforum.com/t/2012-e4-circuit-board/19962/3 "2020-10-01T21:45:29Z")

</div>

Do you have a picture of the controller?  
How much would you want for it?  
Thanks for the reply  
Kevin

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [October 1, 2020, 10:04pm UTC](https://community.electricforum.com/t/2012-e4-circuit-board/19962/4 "2020-10-01T22:04:13Z")

</div>

Here is one of them.

> [@Matching T-4 Controller and 5HP Motor](https://community.electricforum.com/t/matching-t-4-controller-and-5hp-motor/19699):
>
> I have a matching set of T-4 Controller and 5ph motor. Out of the same 2009 E2 with less than 1000 miles on them. Pulled them during and AC conversion - perfect working condition almost factory new. 600.00 for the pair + shipping 400.00 each separately + shipping

I have some older T-4’s I would take less for.

---

<div class="post-metadata">

**Author:** ![kbw](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@kbw](https://community.electricforum.com/u/kbw)\
**Post date:** [October 1, 2020, 10:21pm UTC](https://community.electricforum.com/t/2012-e4-circuit-board/19962/5 "2020-10-01T22:21:15Z")

</div>

Thanks for the reply  
All I need is the controller

---

<div class="post-metadata">

**Author:** ![kbw](https://avatars.discourse-cdn.com/v4/letter/k/f14d63/32.png) [@kbw](https://community.electricforum.com/u/kbw)\
**Post date:** [October 1, 2020, 10:26pm UTC](https://community.electricforum.com/t/2012-e4-circuit-board/19962/6 "2020-10-01T22:26:19Z")

</div>

I just looked at your photo  
It’s actually the unit with all the circuitry that I need  
Maybe it’s better called a fuse panel  
But it has a circuit board behind it that is blown

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/c/c4b1d09f03096059a05dd9e0f93f80e6f5a40ca4.jpeg) Uploading: image.jpg…

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [October 1, 2020, 10:30pm UTC](https://community.electricforum.com/t/2012-e4-circuit-board/19962/7 "2020-10-01T22:30:56Z")

</div>

Oh, that is a PSDM - 1K used almost everywhere.  
I don’t have one of those - check ebay