# 2010 e6 batteries and charger

**URL:** <https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965>\
**Category:** GEM Forum\
**Created:** [June 7, 2020, 6:42pm UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965 "2020-06-07T18:42:58Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jabroner](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@Jabroner](https://community.electricforum.com/u/Jabroner)\
**Post date:** [June 7, 2020, 6:42pm UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965/1 "2020-06-07T18:42:58Z")

</div>

I got a 2010 gem e6 given to me. It has 9 8v batteries Polaris gel. The previous owner said the batteries were overcharged and they didn’t want to replace the batteries/charger. It sat over a year I tried manually charging them to see if they will hold a charge and they won’t. Doing some searching on here alot of people say the O’Reilly 12v 31dcm I believe batteries are good. Will I be able to switch from a 9 8v gel battery system to a 6 12v battery system? Also I tried plugging in the charger to the wall and I do not get any lights flashing at all. How do I check the charger to see if it needs replaced?

---

<div class="post-metadata">

**Author:** ![Monkeyron](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/monkeyron/32/6634_2.png) [@Monkeyron](https://community.electricforum.com/u/Monkeyron)\
**Post date:** [June 7, 2020, 8:18pm UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965/2 "2020-06-07T20:18:48Z")

</div>

Master switch off. Plug in the charger. It should flash the Algorithm number that it is programed to. My E6 says #23 for 9-8Volt gels.  
I just installed a set of 6- 12 volt Deka 8G31 gels. I know it won’t range like the 8 volts do but at about $1k savings I’ll be ok. I will reprogram the DQ to #14 next

---

<div class="post-metadata">

**Author:** ![Jabroner](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@Jabroner](https://community.electricforum.com/u/Jabroner)\
**Post date:** [June 7, 2020, 8:21pm UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965/3 "2020-06-07T20:21:40Z")

</div>

I have the switch off and when I plug it in none of the charger lights come on not even the fault light

---

<div class="post-metadata">

**Author:** ![Derrick](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@Derrick](https://community.electricforum.com/u/Derrick)\
**Post date:** [June 8, 2020, 12:50pm UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965/4 "2020-06-08T12:50:04Z")

</div>

Sam’s club sells 8v lead acid Deka batteries, a way better option than the 12v batteries. I paid just under $1000 for my 9 batteries for elxd.

---

<div class="post-metadata">

**Author:** ![Monkeyron](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/monkeyron/32/6634_2.png) [@Monkeyron](https://community.electricforum.com/u/Monkeyron)\
**Post date:** [June 10, 2020, 9:54pm UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965/5 "2020-06-10T21:54:11Z")

</div>

120 vac at the charger input cable? Maybe a bad connector at the Hood

---

<div class="post-metadata">

**Author:** ![Monkeyron](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/monkeyron/32/6634_2.png) [@Monkeyron](https://community.electricforum.com/u/Monkeyron)\
**Post date:** [June 10, 2020, 10:02pm UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965/6 "2020-06-10T22:02:23Z")

</div>

Deka batteries? How do you water those? The Deka Gels are maintenance free but are 3 times the cost. Lithium may be a better choice for the cost comparison…

---

<div class="post-metadata">

**Author:** ![Jabroner](https://avatars.discourse-cdn.com/v4/letter/j/a3d4f5/32.png) [@Jabroner](https://community.electricforum.com/u/Jabroner)\
**Post date:** [June 10, 2020, 11:14pm UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965/7 "2020-06-10T23:14:32Z")

</div>

Checked the cable it was good

---

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [June 11, 2020, 4:03am UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965/8 "2020-06-11T04:03:10Z")

</div>

IF you are sure you have power to the charger and no lights come on , Its bad . New charger or send it in to flight systems for repair .

---

<div class="post-metadata">

**Author:** ![Derrick](https://avatars.discourse-cdn.com/v4/letter/d/d9b06d/32.png) [@Derrick](https://community.electricforum.com/u/Derrick)\
**Post date:** [June 11, 2020, 11:19am UTC](https://community.electricforum.com/t/2010-e6-batteries-and-charger/18965/9 "2020-06-11T11:19:58Z")

</div>

That’s the fun part, you get to pull the batteries out and check/top them off. I thought you were talking about lead acid 12v batteries.
