# 2009 Rear Wheel Cylinder **URL:** \ **Category:** GEM Forum\ **Created:** [July 23, 2017, 9:31pm UTC](https://community.electricforum.com/t/2009-rear-wheel-cylinder/12611 "2017-07-23T21:31:26Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![ApacheshoresGEM](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@ApacheshoresGEM](https://community.electricforum.com/u/ApacheshoresGEM)\ **Post date:** [July 23, 2017, 9:31pm UTC](https://community.electricforum.com/t/2009-rear-wheel-cylinder/12611/1 "2017-07-23T21:31:26Z")
Anyone know a part number for the rear cylinders and brake pads on an 09 E4. Started leaking after removing to fix the lug studs. While I am there I will swap out the pads also. ---
**Author:** ![ApacheshoresGEM](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@ApacheshoresGEM](https://community.electricforum.com/u/ApacheshoresGEM)\ **Post date:** [July 24, 2017, 10:53pm UTC](https://community.electricforum.com/t/2009-rear-wheel-cylinder/12611/2 "2017-07-24T22:53:19Z")
Seriously, no one has a part #??? ---
**Author:** ![ApacheshoresGEM](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@ApacheshoresGEM](https://community.electricforum.com/u/ApacheshoresGEM)\ **Post date:** [July 24, 2017, 10:54pm UTC](https://community.electricforum.com/t/2009-rear-wheel-cylinder/12611/3 "2017-07-24T22:54:48Z")
Disregard, I Found it… ---
**Author:** ![Larry](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/larry/32/1265_2.png) [@Larry](https://community.electricforum.com/u/Larry)\ **Post date:** [July 29, 2017, 11:29am UTC](https://community.electricforum.com/t/2009-rear-wheel-cylinder/12611/4 "2017-07-29T11:29:16Z")
Will you please share the info? I also need them. ---
**Author:** ![ApacheshoresGEM](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@ApacheshoresGEM](https://community.electricforum.com/u/ApacheshoresGEM)\ **Post date:** [July 29, 2017, 1:00pm UTC](https://community.electricforum.com/t/2009-rear-wheel-cylinder/12611/5 "2017-07-29T13:00:23Z")
[http://www.nevaccessories.com/Brakes-and-Bearings/products/91/0/4](http://www.nevaccessories.com/Brakes-and-Bearings/products/91/0/4) I ordered from NEV Accessories. $24ea plus freight… They were in stock and I should have them by mid next week. ---
**Author:** ![pacastorena](https://avatars.discourse-cdn.com/v4/letter/p/73ab20/32.png) [@pacastorena](https://community.electricforum.com/u/pacastorena)\ **Post date:** [July 31, 2017, 2:55am UTC](https://community.electricforum.com/t/2009-rear-wheel-cylinder/12611/6 "2017-07-31T02:55:51Z")
Cylinder 0611-00203 Brake Shoes 0311-00833 and 0311-00834 I bought them at NEV Accessories online, pretty good price ---
**Author:** ![Larry](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/larry/32/1265_2.png) [@Larry](https://community.electricforum.com/u/Larry)\ **Post date:** [July 31, 2017, 10:52am UTC](https://community.electricforum.com/t/2009-rear-wheel-cylinder/12611/7 "2017-07-31T10:52:22Z")
Thanks for the information. ---
**Author:** ![ApacheshoresGEM](https://avatars.discourse-cdn.com/v4/letter/a/7bcc69/32.png) [@ApacheshoresGEM](https://community.electricforum.com/u/ApacheshoresGEM)\ **Post date:** [August 1, 2017, 2:38am UTC](https://community.electricforum.com/t/2009-rear-wheel-cylinder/12611/8 "2017-08-01T02:38:47Z")
There are ridiculously easy to swap out. Didn’t have to pull the shoes, Removed the drums, pulled the 2 bolts, removed the line and bleeder nipple and pushed the old ones out, dropped the new ones in and was done in about 20 for both sides. Had to really clean the pads with brake clean since one side leaked. And before anyone starts (I KNOW its not recommended) but its still a GEM not a race Vette. Brakes will slam you into the dash now and they no longer drag at all. Added miles to my travel ability…Worth every penny.