# 2008 GEM e4 needs screws for hard doors

**URL:** <https://community.electricforum.com/t/2008-gem-e4-needs-screws-for-hard-doors/24437>\
**Category:** GEM Forum\
**Created:** [June 11, 2022, 8:43pm UTC](https://community.electricforum.com/t/2008-gem-e4-needs-screws-for-hard-doors/24437 "2022-06-11T20:43:02Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [June 11, 2022, 8:43pm UTC](https://community.electricforum.com/t/2008-gem-e4-needs-screws-for-hard-doors/24437/1 "2022-06-11T20:43:02Z")

</div>

Anyone have drawings or specs on the washered screws used to hold the outer and inner halves of hard doors together? The 2008 I just purchases is missing 1-2 dozen of these screws.

 ![PXL_20220611_203935974](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/d/d86463358e9fdee4d1c20464ca596c5a008dfcc9.jpeg)

---

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [June 11, 2022, 8:45pm UTC](https://community.electricforum.com/t/2008-gem-e4-needs-screws-for-hard-doors/24437/2 "2022-06-11T20:45:55Z")

</div>

also will be looking for rubber strip which goes across the rear side of the sunroof.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [June 11, 2022, 11:50pm UTC](https://community.electricforum.com/t/2008-gem-e4-needs-screws-for-hard-doors/24437/3 "2022-06-11T23:50:58Z")

</div>

> [@dougl](#):
>
> Anyone have drawings or specs on the washered screws used to hold the outer and inner halves of hard doors together?

No info for thread pitch, diameter and length under [https://gem.polaris.com/en-us/](https://gem.polaris.com/en-us/) parts and maintenance tab at the top?

Also, I have a Fastenal down the street from work, I’ll take one of my door screws in and see what they can match up for us.

---

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [June 11, 2022, 11:57pm UTC](https://community.electricforum.com/t/2008-gem-e4-needs-screws-for-hard-doors/24437/4 "2022-06-11T23:57:08Z")

</div>

You know, I have probably thrown dozens of these away taking apart broken or unused electronics to get motors or switches out. They are ~1/8" coarse thread 1/2" long. The washer is integrated and does not come off. Typical plastic thread with flat end…

From what I’ve found searching only the standard door parts are listed and those are not listed with standard GEM parts.

---

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [June 12, 2022, 12:09am UTC](https://community.electricforum.com/t/2008-gem-e4-needs-screws-for-hard-doors/24437/5 "2022-06-12T00:09:05Z")

</div>

> [@dougl](#):
>
> You know, I have probably thrown dozens of these away taking apart broken or unused electronics to get motors or switches out.

ROFL… Me too man… Me too…