# 2008 E4 Factory  Programming Settings

**URL:** <https://community.electricforum.com/t/2008-e4-factory-programming-settings/26542>\
**Category:** GEM Forum\
**Created:** [June 17, 2023, 9:15am UTC](https://community.electricforum.com/t/2008-e4-factory-programming-settings/26542 "2023-06-17T09:15:04Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [June 19, 2023, 1:10pm UTC](https://community.electricforum.com/t/2008-e4-factory-programming-settings/26542/16 "2023-06-19T13:10:31Z")

</div>

No T4 on this spreadsheet, but T5 stock is. Seem to recall they are very similar. T5 was higher amperage for the elxd and e6 iirc.

> [@Master spreadsheet with T1, T2, T3, & T4 settings](https://community.electricforum.com/t/master-spreadsheet-with-t1-t2-t3-t4-settings/16693):
>
> I’ve always envisioned how nice it would be if there was a big ole spreadsheet with tabs for each controller type showing the settings and what they do in layman’s speak. With everybody doing so many different things such as bigger or smaller wheels, standard and high voltage and other modifications I know this would be hard to make universal. I’m thinking we do a Version1 with just the stock values for all the controllers and then a few tabs with R4F settings or known vanilla values that are …

---

_[View the full topic](https://community.electricforum.com/t/2008-e4-factory-programming-settings/26542)._
