# 2007 Gem e6 Service Manual

**URL:** <https://community.electricforum.com/t/2007-gem-e6-service-manual/24875>\
**Category:** Uncategorized\
**Created:** [August 8, 2022, 12:49pm UTC](https://community.electricforum.com/t/2007-gem-e6-service-manual/24875 "2022-08-08T12:49:10Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Maui](https://avatars.discourse-cdn.com/v4/letter/m/ac8455/32.png) [@Maui](https://community.electricforum.com/u/Maui)\
**Post date:** [August 8, 2022, 12:49pm UTC](https://community.electricforum.com/t/2007-gem-e6-service-manual/24875/1 "2022-08-08T12:49:11Z")

</div>

Hello

Long time listener, first time caller!  
Having issues with my 2007 Gem e6 car. Will not run after a rain or high humid conditions. Nothing under the hood appears wet.

Hoping someone would have the 2007 Gem e6 Service Manual PDF and ideas on where to begin.

Email address. [flyairmaui@gmail.com](mailto:flyairmaui@gmail.com)

Thanks in advance!  
Don

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [August 8, 2022, 3:08pm UTC](https://community.electricforum.com/t/2007-gem-e6-service-manual/24875/2 "2022-08-08T15:08:28Z")

</div>

Need some clues before posting suggestions.

Any error codes?  
When key switched OFF, drop brake. - Does it beeeeeeeep?  
When key switched ON, does dash light up?

Do yo have a meter?  
Does this happen often?

---

<div class="post-metadata">

**Author:** ![Maui](https://avatars.discourse-cdn.com/v4/letter/m/ac8455/32.png) [@Maui](https://community.electricforum.com/u/Maui)\
**Post date:** [August 9, 2022, 6:16am UTC](https://community.electricforum.com/t/2007-gem-e6-service-manual/24875/3 "2022-08-09T06:16:06Z")

</div>

Hello  
I will do a full check tomorrow. That was very nice of you to suggest some things to look for. I appreciate that. Thanks!

---

<div class="post-metadata">

**Author:** ![Maui](https://avatars.discourse-cdn.com/v4/letter/m/ac8455/32.png) [@Maui](https://community.electricforum.com/u/Maui)\
**Post date:** [August 10, 2022, 3:34am UTC](https://community.electricforum.com/t/2007-gem-e6-service-manual/24875/4 "2022-08-10T03:34:35Z")

</div>

Hello  
So it’s an intermittent problem. I have the following error codes displayed: 05,08,11,21.  
Do you have a chart with an explanation of the codes?  
Thanks!

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [August 10, 2022, 4:13am UTC](https://community.electricforum.com/t/2007-gem-e6-service-manual/24875/5 "2022-08-10T04:13:12Z")

</div>

> [@COMPLETE list of GEM error CODES](https://community.electricforum.com/t/complete-list-of-gem-error-codes/1492):
>
> Some of the following codes do not appear in the factory manual. Not all of these codes will necessarily apply to all model years. Corrective actions are listed following each code. Thanks to several other members and Ride for Fun who have provided new codes for this list. Also see my post listing the Zivan NG1 charger errors. [http://www.electricforum.com/cars/neighborhood-electric-vehicles-hev/2507-zivan-ng1-charger-error-codes.html](http://www.electricforum.com/cars/neighborhood-electric-vehicles-hev/2507-zivan-ng1-charger-error-codes.html) Complete list of GEM error codes: Error Code Descri…

You have such a wild collection of them but they seem to be centered around the foot pedal.

Up front under the hood, down under the brake master you can see the pedal module. Unplug it and see if the errors go away.

Otherwise, look at the grey box on top of the shelf in front. That is your controller. On top of your controller is a 23 pin plug with a bunch of wires. Trip the safety catch by sticking a small screwdriver under the lever and pull out on it just a bit and pull/wiggle the main plug off the controller.

Look at everything for signs of water.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [August 10, 2022, 4:34am UTC](https://community.electricforum.com/t/2007-gem-e6-service-manual/24875/6 "2022-08-10T04:34:35Z")

</div>

Also, a more detailed description of error codes can be found in the GE controller manual.

---

<div class="post-metadata">

**Author:** ![Maui](https://avatars.discourse-cdn.com/v4/letter/m/ac8455/32.png) [@Maui](https://community.electricforum.com/u/Maui)\
**Post date:** [August 10, 2022, 7:39pm UTC](https://community.electricforum.com/t/2007-gem-e6-service-manual/24875/7 "2022-08-10T19:39:00Z")

</div>

Thanks for your quick response. I will look in that area for water infiltration.  
So the most recurring error code is **08**.  
Is the accelerator pedal a common problem?  
Thanks again  
John

---

<div class="post-metadata">

**Author:** ![Maui](https://avatars.discourse-cdn.com/v4/letter/m/ac8455/32.png) [@Maui](https://community.electricforum.com/u/Maui)\
**Post date:** [August 11, 2022, 9:28pm UTC](https://community.electricforum.com/t/2007-gem-e6-service-manual/24875/8 "2022-08-11T21:28:41Z")

</div>

Hi How difficult is it to replace the accelerator assembly? The assembly is $565.
