# 2006 Gem car gas pedal **URL:** \ **Category:** GEM Forum\ **Created:** [January 1, 2020, 5:07pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791 "2020-01-01T17:07:17Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [January 1, 2020, 5:07pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/1 "2020-01-01T17:07:17Z")
Does anyone know where I can buy a gas pedal assembly for my 2006 Gem car long body? ---
**Author:** ![jwc](https://avatars.discourse-cdn.com/v4/letter/j/bcef8e/32.png) [@jwc](https://community.electricforum.com/u/jwc)\ **Post date:** [January 1, 2020, 7:22pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/2 "2020-01-01T19:22:47Z")
If they are similar for my 2002, I ordered directly from Linemaster and was pretty pleased. It was way cheaper than where I found elsewhere. It requires re-wiring the end to use the correct plug on the cart. You can pull the part number from this website or directly off the pedal. ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [January 4, 2020, 1:11pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/3 "2020-01-04T13:11:52Z")
Thanks! Its a 2008 4 seater car. I’ve had to clean the contactors on the inside to get it going. Just ordered a new motor so I’m looking for part sources incase I have more problems. I’m glad I found this site… ---
**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\ **Post date:** [January 4, 2020, 5:12pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/4 "2020-01-04T17:12:08Z")
I think the TIG welding pedals (Linemaster) went away after 2004. I’m not really familiar with the 2006-2008. Maybe Dave (@Inwo), Rodney (@Old_Houseboater) or Mike (@LithiumGods) can point you in the right direction for a new throttle pedal. ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [January 4, 2020, 7:50pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/5 "2020-01-04T19:50:25Z")
Dave Bissen has a work around. ( [INWO@aol.com](mailto:INWO@aol.com)) ---
**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\ **Post date:** [January 4, 2020, 10:46pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/6 "2020-01-04T22:46:51Z")
@trip has my test parts. He may be able to help. Else a Saturn throttle will work by adding an external switch. Not as hard as it sounds. Search Saturn throttle for pictures. ---
**Author:** ![Trip](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/trip/32/2696_2.png) [@Trip](https://community.electricforum.com/u/Trip)\ **Post date:** [January 5, 2020, 10:18pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/9 "2020-01-05T22:18:15Z")
Trip here. If you end you needing a throttle pedal I can get one set up for you. ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [January 6, 2020, 3:21pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/10 "2020-01-06T15:21:09Z")
Thanks. That’s interesting that the assembly is the same… I’ll let you know if I need one set up. What would it cost for the set up. ---
**Author:** ![Trip](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/trip/32/2696_2.png) [@Trip](https://community.electricforum.com/u/Trip)\ **Post date:** [January 6, 2020, 3:28pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/11 "2020-01-06T15:28:35Z")
150 plus shipping. Would take a couple of days to get the parts together. If you want it ready to b up it bbn in with the gem car pedal would be a bit more and I would need you to ship your old unit to me ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [January 6, 2020, 10:51pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/12 "2020-01-06T22:51:41Z")
What does the external switch do. I bought a pedal at pick and pull for $30.00. ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [January 9, 2020, 1:56pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/14 "2020-01-09T13:56:52Z")
Thanks. I just bought a pedal from pic & pull for $30.00 Came off of a 2007 . I’ll have to figure out how to wire it or get someone on this site to set it up… Thanks for all of the support… ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [January 11, 2020, 3:10am UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/17 "2020-01-11T03:10:53Z")
I’ll try to set this up later, Just got my new motor installed and now my charger has a light blinking on it. I don’t think the battery gauge is reading correctly and also the switch ro select mph hour or klg only has one wire on the back of it. I’ve been looking for a wiring diagram for this car but haven’t found what i need’'Running about 25 mph , Just have a few issues, Thanks ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [January 12, 2020, 1:38pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/18 "2020-01-12T13:38:07Z")
I figured out the charging issue. I didn’t realize the main breaker had to be on and the emergency brake set for the car to charge. Also figured out how to set the speedometer to klms. I;m looking for a parts resource for my drive switch mode. Part number 0606-00415… don’t seem to be one available googling the part number. ---
**Author:** ![Gem\_e2](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/gem_e2/32/1849_2.png) [@Gem\_e2](https://community.electricforum.com/u/Gem_e2)\ **Post date:** [January 13, 2020, 5:43pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/19 "2020-01-13T17:43:03Z")
Hi polaris switch number 4013696 [https://www.cartmart.com/product/polaris-4013696-sw-toggle-3-pos-drive-mode](https://www.cartmart.com/product/polaris-4013696-sw-toggle-3-pos-drive-mode) ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [January 15, 2020, 1:31pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/20 "2020-01-15T13:31:09Z")
Thanks for the information. I’m not sure if I should start a new thread or not on my next issue? My 2008 gem car is jerky on take off. Any ideas. I just installed a new motor. Possibly the gas pedal doing this? Thanks for any ideas… ---
**Author:** ![Sharkba8](https://avatars.discourse-cdn.com/v4/letter/s/5fc32e/32.png) [@Sharkba8](https://community.electricforum.com/u/Sharkba8)\ **Post date:** [January 17, 2020, 3:55pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/21 "2020-01-17T15:55:36Z")
Trip, if my pedal is not making the right contact on the inside will this make the car jerky on take off. I might have to get you to set me up a pedal… ---
**Author:** ![Ironpumper](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ironpumper/32/6705_2.png) [@Ironpumper](https://community.electricforum.com/u/Ironpumper)\ **Post date:** [April 29, 2020, 2:49am UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/22 "2020-04-29T02:49:44Z")
Trip…can you email me. Just joined forum. Need a potentiometer for my 2006 gem. Thanks my friend ! ---
**Author:** ![Ironpumper](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ironpumper/32/6705_2.png) [@Ironpumper](https://community.electricforum.com/u/Ironpumper)\ **Post date:** [April 29, 2020, 2:52am UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/23 "2020-04-29T02:52:33Z")
Hi Trip…I am in need of a potentiometer for my 2006 GEM. Be more than happy to pay. I heard you have a great way of retrofitting. Thanks ! ---
**Author:** ![Trip](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/trip/32/2696_2.png) [@Trip](https://community.electricforum.com/u/Trip)\ **Post date:** [April 29, 2020, 6:58pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/24 "2020-04-29T18:58:03Z")
I can put one together for you. Unfortunately have to raise the price to 200 plus shipping. Costs me close to 200 to put it together ---
**Author:** ![Ironpumper](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/ironpumper/32/6705_2.png) [@Ironpumper](https://community.electricforum.com/u/Ironpumper)\ **Post date:** [April 29, 2020, 7:24pm UTC](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791/25 "2020-04-29T19:24:16Z")
NO WORRIES…THANKYOU TRIP 😊😊😊 PLEASE call me at your convenience 530 474 4015. Sincerely Dan L [Next page](https://community.electricforum.com/t/2006-gem-car-gas-pedal/17791.md?page=2)