# 2005 GEM ES LCD cloudy

**URL:** https://community.electricforum.com/t/2005-gem-es-lcd-cloudy/28030
**Category:** GEM Forum
**Created:** [June 30, 2024, 8:42pm UTC](https://community.electricforum.com/t/2005-gem-es-lcd-cloudy/28030 "2024-06-30T20:42:56Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![marshmlow](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@marshmlow](https://community.electricforum.com/u/marshmlow)
#### Post date: [July 3, 2024, 2:29pm UTC](https://community.electricforum.com/t/2005-gem-es-lcd-cloudy/28030/2 "2024-07-03T14:29:10Z")

</div>

Hey Danlin!

I also had a 2005 GEM and on my unit, the cloudy part was on the inside, so no way to polish it without taking it all apart. Mine was a piece of glass which I cracked when removing. I posted details here:

> [@2005 e4 buzzer issue](https://community.electricforum.com/t/2005-e4-buzzer-issue/20921/3):
>
> @AssyRequired Thanks for the reply and the suggestions. Here’s what I did: I flipped on the master breaker. Ignition is off. Faint beep started. I disconnected one of the wires going to the e-brake switch. Faint beep got even fainter. I’d say sound was reduced by 50%, but it was still audible. I then disconnected the second wire. The beeping stopped. Note that the first wire is still disconnected, so the e-brake switch is completely removed at this point. I touch one of the wires back to th…

I was able to replace it for about $8 and a bit of legwork.

Good luck!

---

_[View the full topic](https://community.electricforum.com/t/2005-gem-es-lcd-cloudy/28030)._