# 2005 GEM e4 - Display Settings

**URL:** <https://community.electricforum.com/t/2005-gem-e4-display-settings/22845>\
**Category:** Battery & Chargers\
**Created:** [November 5, 2021, 7:34pm UTC](https://community.electricforum.com/t/2005-gem-e4-display-settings/22845 "2021-11-05T19:34:28Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)\
**Post date:** [November 9, 2021, 11:53pm UTC](https://community.electricforum.com/t/2005-gem-e4-display-settings/22845/4 "2021-11-09T23:53:19Z")

</div>

Try the steps in this thread:

> [@Premature battery failure](https://community.electricforum.com/t/premature-battery-failure/22821):
>
> DOES YOUR CART SUFFER FROM PBF (PREMATURE BATTERY FAILURE)? Lots of posts complaining about carts running normally then after 3 or 4 miles slowing down and the turtle light coming on with only 3 or 4 bars used on the SOC. Batteries less than 2 years old. DO THIS: As soon as the turtle comes on do a (Brake load test). Hook your volt meter to one battery at a time, hold your brake on firmly and mash the throttle a good battery will show 12 plus volts. A dud will drop to 8 to 10 volts. Don’t…

---

_[View the full topic](https://community.electricforum.com/t/2005-gem-e4-display-settings/22845)._
