# 2002 GEM Dead Overnight

**URL:** https://community.electricforum.com/t/2002-gem-dead-overnight/12781
**Category:** GEM Forum
**Tags:** gem
**Created:** [September 4, 2017, 8:59pm UTC](https://community.electricforum.com/t/2002-gem-dead-overnight/12781 "2017-09-04T20:59:22Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Newcadd](https://avatars.discourse-cdn.com/v4/letter/n/a587f6/32.png) [@Newcadd](https://community.electricforum.com/u/Newcadd)
#### Post date: [September 4, 2017, 8:59pm UTC](https://community.electricforum.com/t/2002-gem-dead-overnight/12781/1 "2017-09-04T20:59:22Z")

</div>

I have a 2002 GEM, display came on for a few second and goes off, key switch is only showing 13.5 volts. Solenoid is showing 75.1 volts. Lights, turn signals, horn, wipers and lights work. No display so no error code shows.

---

<div class="post-metadata">

### Author: ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)
#### Post date: [September 9, 2017, 3:30pm UTC](https://community.electricforum.com/t/2002-gem-dead-overnight/12781/3 "2017-09-09T15:30:32Z")

</div>

Sounds like the batteries are charged and the 12V DC-DC converter is working. So, did you check the wiring from the display back to the controller? Maybe throw the main disconnect and check the connections on the controller too.

---

<div class="post-metadata">

### Author: ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [September 9, 2017, 4:35pm UTC](https://community.electricforum.com/t/2002-gem-dead-overnight/12781/4 "2017-09-09T16:35:49Z")

</div>

![2002 diagram](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/8/80aea7d64f1a629dde61e86195d31f6906ea80da.gif)

Need B+ on controller pin 2 for display.