# 2002 GEM Contactor Getting Very Warm

**URL:** <https://community.electricforum.com/t/2002-gem-contactor-getting-very-warm/13728>\
**Category:** GEM Forum\
**Created:** [May 13, 2018, 8:29pm UTC](https://community.electricforum.com/t/2002-gem-contactor-getting-very-warm/13728 "2018-05-13T20:29:33Z")\
**Posts on this page:** 5\
**Page:** 3

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 22, 2018, 4:50pm UTC](https://community.electricforum.com/t/2002-gem-contactor-getting-very-warm/13728/41 "2018-05-22T16:50:09Z")

</div>

Another thing that works is a momentary switch from B+ to charger red wire.

Anything over 24v works.

I have made a programming box by connecting 3 x 9v batteries in series.  
Connect to red and blk wire via a momentary push button switch.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 22, 2018, 4:54pm UTC](https://community.electricforum.com/t/2002-gem-contactor-getting-very-warm/13728/42 "2018-05-22T16:54:39Z")

</div>

> [@MikeKC](#):
>
> What profile (algorithm) number is #135? I don’t have to do the four second thing 135 times do I?

No, there are only 6 installed. It may be the next one in line or #6 worse case.  
It can be very frustrating. It is for me. Once you get it figured out it’s easy.  
Get set up where you can see the charger easily, have a seat, and patience.  
Ask Grant or OldHousboater for help, if needed.  
I’m spoiled, as have a programmer! 🙂 ![Lith%20profiles](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/6/6da043b2f91d268a22b813a499d9026bb878ff0c.gif)

67, 211, 163, 123 are not in it  
176 has been added to the list for 6 total

---

<div class="post-metadata">

**Author:** ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)\
**Post date:** [May 22, 2018, 10:15pm UTC](https://community.electricforum.com/t/2002-gem-contactor-getting-very-warm/13728/43 "2018-05-22T22:15:59Z")

</div>

Got it - 95.9V and were off and driving. I don’t know where the controller is seeing the 96V limit and not liking it but it is. We have the -15 spoof on pin #1 -

Were going to set the charger to profile #135 for now until we figure out something else or replace the BMS we burnt.

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 25, 2018, 9:03pm UTC](https://community.electricforum.com/t/2002-gem-contactor-getting-very-warm/13728/44 "2018-05-25T21:03:40Z")

</div>

I found your resistor in a new charger box that Grant just bought. ☹  
Lucky that UPS missed me today, so I was able to put another in the box. 🙂

---

<div class="post-metadata">

**Author:** ![Mr.Vern](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mr.vern/32/2658_2.png) [@Mr.Vern](https://community.electricforum.com/u/Mr.Vern)\
**Post date:** [May 25, 2018, 10:10pm UTC](https://community.electricforum.com/t/2002-gem-contactor-getting-very-warm/13728/45 "2018-05-25T22:10:11Z")

</div>

Well its all gonna make for a fun next week. I have the charger from you coming as well as a new speed sensor and magnet from different sources. Add a few resilient bumpers from another supplier and my motor being checked and a new bearing installed at the motor shop. I guess waiting for all of it will force me to enjoy the 3 day weekend instead of obsessing over this thing 🙂

[Previous page](https://community.electricforum.com/t/2002-gem-contactor-getting-very-warm/13728.md?page=2)
