# 2002 Gem Car stuck in turf mode

**URL:** <https://community.electricforum.com/t/2002-gem-car-stuck-in-turf-mode/15991>\
**Category:** GEM Forum\
**Created:** [May 7, 2019, 12:12am UTC](https://community.electricforum.com/t/2002-gem-car-stuck-in-turf-mode/15991 "2019-05-07T00:12:39Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![skihard](https://avatars.discourse-cdn.com/v4/letter/s/90db22/32.png) [@skihard](https://community.electricforum.com/u/skihard)\
**Post date:** [May 7, 2019, 12:12am UTC](https://community.electricforum.com/t/2002-gem-car-stuck-in-turf-mode/15991/1 "2019-05-07T00:12:39Z")

</div>

My 2002 Gem car will not switch out of Turf mode?

---

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [May 7, 2019, 6:15am UTC](https://community.electricforum.com/t/2002-gem-car-stuck-in-turf-mode/15991/2 "2019-05-07T06:15:58Z")

</div>

you will have to check the switch and then check the signals from the switch to the controller.

---

<div class="post-metadata">

**Author:** ![skihard](https://avatars.discourse-cdn.com/v4/letter/s/90db22/32.png) [@skihard](https://community.electricforum.com/u/skihard)\
**Post date:** [May 7, 2019, 1:40pm UTC](https://community.electricforum.com/t/2002-gem-car-stuck-in-turf-mode/15991/3 "2019-05-07T13:40:16Z")

</div>

That was it! The wire from the switch to the connector to the controller was open, replaced the wire and it works

Thank you

---

<div class="post-metadata">

**Author:** ![Mr.Vern](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mr.vern/32/2658_2.png) [@Mr.Vern](https://community.electricforum.com/u/Mr.Vern)\
**Post date:** [May 7, 2019, 3:53pm UTC](https://community.electricforum.com/t/2002-gem-car-stuck-in-turf-mode/15991/4 "2019-05-07T15:53:55Z")

</div>

Check the white wire where it enters the Molex connector. Maybe the guy who crimped the pins 17 years ago used too much pressure and it finally failed. 😉

---

<div class="post-metadata">

**Author:** ![skihard](https://avatars.discourse-cdn.com/v4/letter/s/90db22/32.png) [@skihard](https://community.electricforum.com/u/skihard)\
**Post date:** [May 7, 2019, 8:51pm UTC](https://community.electricforum.com/t/2002-gem-car-stuck-in-turf-mode/15991/5 "2019-05-07T20:51:05Z")

</div>

You are correct I bypassed the connector with the white wire and it works perfect.

Thank you
