# 2002 Ford Think manuals

**URL:** <https://community.electricforum.com/t/2002-ford-think-manuals/19848>\
**Category:** Ford NEVs\
**Created:** [September 16, 2020, 12:41pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848 "2020-09-16T12:41:16Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![oceanrover](https://avatars.discourse-cdn.com/v4/letter/o/71e660/32.png) [@oceanrover](https://community.electricforum.com/u/oceanrover)\
**Post date:** [December 20, 2020, 8:57pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/21 "2020-12-20T20:57:07Z")

</div>

I keep and eye out but I only received 1 email from you regarding the reset sticker.  
[oceanrover@earthlink.net](mailto:oceanrover@earthlink.net)

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [December 20, 2020, 9:47pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/22 "2020-12-20T21:47:17Z")

</div>

Sent for the 3rd time. Do you have another email? Ran into this same problem with one other guy. We ended up using a different email and it went through. Gmail is easy to sign up with.

---

<div class="post-metadata">

**Author:** ![Ajgawron](https://avatars.discourse-cdn.com/v4/letter/a/46a35a/32.png) [@Ajgawron](https://community.electricforum.com/u/Ajgawron)\
**Post date:** [January 2, 2021, 3:21am UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/23 "2021-01-02T03:21:49Z")

</div>

Hi David,

Any chance you could email me the manual as well? [Andrew.gawron@gmail.com](mailto:Andrew.gawron@gmail.com)

Andy

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [January 2, 2021, 2:08pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/24 "2021-01-02T14:08:24Z")

</div>

> [@Ajgawron](#):
>
> [Andrew.gawron@gmail.com](mailto:Andrew.gawron@gmail.com)

Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>

---

<div class="post-metadata">

**Author:** ![KScott](https://avatars.discourse-cdn.com/v4/letter/k/7993a0/32.png) [@KScott](https://community.electricforum.com/u/KScott)\
**Post date:** [March 4, 2021, 10:46pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/26 "2021-03-04T22:46:33Z")

</div>

Would it be possible to get the manuals as well?

My email is [Korey.Scott@me.com](mailto:Korey.Scott@me.com)

Thanks in advance!

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [March 5, 2021, 12:34am UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/27 "2021-03-05T00:34:53Z")

</div>

Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>

---

<div class="post-metadata">

**Author:** ![mitsured](https://avatars.discourse-cdn.com/v4/letter/m/ad7895/32.png) [@mitsured](https://community.electricforum.com/u/mitsured)\
**Post date:** [March 5, 2021, 7:48pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/28 "2021-03-05T19:48:03Z")

</div>

Hi David,

could you please send me the service manual?

[mitsured93@yahoo.com](mailto:mitsured93@yahoo.com)

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [March 6, 2021, 1:12pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/29 "2021-03-06T13:12:04Z")

</div>

Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>

---

<div class="post-metadata">

**Author:** ![visable](https://avatars.discourse-cdn.com/v4/letter/v/ea666f/32.png) [@visable](https://community.electricforum.com/u/visable)\
**Post date:** [April 17, 2021, 10:28am UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/31 "2021-04-17T10:28:32Z")

</div>

hello david i am new to this forum and just got a think for my wife to drive up to our store , just got new cells in and wanted to ask if i could get a copy of the service manual and bulletin. i have not powered up the car yet because i am not sure about one of the small wires one goes to batt 1 neg but the other has no tag so i just put it on hold tell i know, guessing it goes on the batt 6 pos beside batt1 but then again thats just a guess and why i am asking , thanks , [cruzhdf@gmail.com](mailto:cruzhdf@gmail.com)

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [April 17, 2021, 11:40am UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/32 "2021-04-17T11:40:01Z")

</div>

Manuals sent. Make sure that wire doesn’t go to negative. One wire is for the charger ground that goes to battery #1 ground. Another wire is battery temp which also goes to battery #1 ground

---

<div class="post-metadata">

**Author:** ![visable](https://avatars.discourse-cdn.com/v4/letter/v/ea666f/32.png) [@visable](https://community.electricforum.com/u/visable)\
**Post date:** [April 17, 2021, 11:50am UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/33 "2021-04-17T11:50:18Z")

</div>

so both go to batt 1 - no small to batt 6+, and thanks for a quick and assume response

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [April 17, 2021, 11:58am UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/34 "2021-04-17T11:58:47Z")

</div>

Just make sure the one is charger ground before hooking it up. Just ohm test it out to the charger plug under the hood. You probably have the updated Delta Q charger that Ford updated under warranty so look at the TSB 04-24-9 for proper wiring as the manual is wrong unless the charger was never changed. If the charger is yellow you have the updated one. The charger ground is usually wrapped in orange tape at the battery. The battery temp sensor is easily identified, just do a search on here for a picture of that.

---

<div class="post-metadata">

**Author:** ![visable](https://avatars.discourse-cdn.com/v4/letter/v/ea666f/32.png) [@visable](https://community.electricforum.com/u/visable)\
**Post date:** [April 17, 2021, 4:31pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/35 "2021-04-17T16:31:06Z")

</div>

thanks again  
david i see your good help to all that ask

---

<div class="post-metadata">

**Author:** ![visable](https://avatars.discourse-cdn.com/v4/letter/v/ea666f/32.png) [@visable](https://community.electricforum.com/u/visable)\
**Post date:** [April 18, 2021, 9:10pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/36 "2021-04-18T21:10:24Z")

</div>

david i sent ya a email asking if these will run without a charger in to test the system for other issues before i buy a charger? do you have to use jumpers or is there a way to see if there are more issues to come thanks don

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [April 19, 2021, 9:52am UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/37 "2021-04-19T09:52:08Z")

</div>

Yes they will run without the charger. You could unplug the dc/dc converters and run jumper wires from the converter plug to one of the batteries to test all the 12 volt circuits.

---

<div class="post-metadata">

**Author:** ![BradTX](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@BradTX](https://community.electricforum.com/u/BradTX)\
**Post date:** [April 24, 2021, 2:33am UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/38 "2021-04-24T02:33:34Z")

</div>

Hey David,

Can I get a copy of the manual as well?

[Westfortworthgolfcarts@gmail.com](mailto:Westfortworthgolfcarts@gmail.com)

Thank you,  
Brad

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [April 24, 2021, 10:34am UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/39 "2021-04-24T10:34:15Z")

</div>

Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>

---

<div class="post-metadata">

**Author:** ![BradTX](https://avatars.discourse-cdn.com/v4/letter/b/ea666f/32.png) [@BradTX](https://community.electricforum.com/u/BradTX)\
**Post date:** [April 24, 2021, 12:21pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/40 "2021-04-24T12:21:01Z")

</div>

Thank you David! This will be very helpful.

---

<div class="post-metadata">

**Author:** ![apowell](https://avatars.discourse-cdn.com/v4/letter/a/c68b51/32.png) [@apowell](https://community.electricforum.com/u/apowell)\
**Post date:** [April 27, 2021, 2:44pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/41 "2021-04-27T14:44:04Z")

</div>

It would be greatly appreciated if that manual mad it my way as well. Thank you so much, just got my think and i look forward to running around the neighborhood! [apowell1821@gmail.com](mailto:apowell1821@gmail.com)

---

<div class="post-metadata">

**Author:** ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)\
**Post date:** [April 27, 2021, 3:11pm UTC](https://community.electricforum.com/t/2002-ford-think-manuals/19848/42 "2021-04-27T15:11:55Z")

</div>

Manual sent \>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>\>

[Previous page](https://community.electricforum.com/t/2002-ford-think-manuals/19848.md?page=1)

[Next page](https://community.electricforum.com/t/2002-ford-think-manuals/19848.md?page=3)
