# 2002 E825 GE Sentry Regenerative Braking question

**URL:** <https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960>\
**Category:** GEM Forum\
**Created:** [June 26, 2018, 5:57am UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960 "2018-06-26T05:57:29Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![Mr.Vern](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mr.vern/32/2658_2.png) [@Mr.Vern](https://community.electricforum.com/u/Mr.Vern)\
**Post date:** [July 3, 2018, 6:06pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/21 "2018-07-03T18:06:38Z")

</div>

4 settings below affect Regen. I focus on Armature current because its the higher current function. I don’t know what the ratio of that to Field should be so some of the smart guys might be able to clarify

FUNCTION 9 REGEN ARMATURE CURRENT LIMIT  
(Push 9)  
This function allows for the adjustment of the maximum  
armature current limit during regenerative braking.  
Range 32 to 240 amps  
Set 1 to 255  
Resolution 0.8157 amps per set unit  
Example Setting of 221 = (221x0.8157) +32  
= 212 amps  
FUNCTION 10 REGEN FIELD CURRENT LIMIT  
( Push 10 )  
This function allows for the adjustment of the maximum  
field current limit during regenerative braking.  
Range 0 to 30 amps  
Set 51 to 255  
Resolution 0.147 amps per set unit  
Example Setting of 180 = (180-51)x0.147  
= 19 amps  
CAUTION: Do not set this function to a value less than 51.  
Important Note: The function is used to optimize motor and  
control performance and this setting will be determined by  
GE and OEM engineers at the time of vehicle development.  
This setting must not be changed by field personnel without  
the permission of the OEM.  
FUNCTION 19 FIELD CURRENT RAMP RATE DURING  
REGEN/PLUGGING  
( Push CONT 4 )  
This function adjusts the rate at which field current ramps  
to full value during regenerative or plug braking when a  
direction change is made.  
Range 0 to 0.255 seconds  
Setting 0 to 255  
Resolution 0.001 seconds per set unit  
Example: Setting of 12 = 0.012 seconds  
FUNCTION 21 ARMATURE CURRENT RAMP DURING  
REGEN  
(Push CONT 6)  
This function adjusts the rate at which armature current  
ramps .8 amps steps to full value during regenerative  
braking when a direction change is made.  
Range .001 to 0.255 seconds  
Setting 0 to 255  
Resolution 0.8 seconds per set unit  
Example: Setting of 12 = 0.012 seconds  
Important Note: The function is used to optimize motor and  
control performance and this setting will be determined by  
GE and OEM engineers at the time of vehicle development.  
This setting must not be changed by field personnel without  
the permission of the OEM.

---

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [July 3, 2018, 11:07pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/22 "2018-07-03T23:07:23Z")

</div>

leave all of those alone . change #19 and #20 to 1 . also drop function #5 by 5 points

---

<div class="post-metadata">

**Author:** ![Mr.Vern](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mr.vern/32/2658_2.png) [@Mr.Vern](https://community.electricforum.com/u/Mr.Vern)\
**Post date:** [July 30, 2018, 2:48am UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/23 "2018-07-30T02:48:48Z")

</div>

@LithiumGods - I’m not sure I’m tracking you on this. Setting 20 is MPH overspeed on my T1. If I set this to 1 I will only be able to go 1 MPH. I’ve been playing with the settings but can’t get the desired effect yet. I want to eliminate Plug Current to avoid heat build up in the motor, but I think that’s all I’m getting because my SOI is always at 100% and so my regen is not kicking in. What value to you set value 14 Internal Resistance Compensation to get the SOI to work properly with your lithium?

---

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [July 30, 2018, 5:20pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/24 "2018-07-30T17:20:41Z")

</div>

forgot your on a t1 , i was referring to t4 settings . on the road and dont have a t1 manual with me to review .

back home next week

---

<div class="post-metadata">

**Author:** ![Mr.Vern](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mr.vern/32/2658_2.png) [@Mr.Vern](https://community.electricforum.com/u/Mr.Vern)\
**Post date:** [July 30, 2018, 6:14pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/25 "2018-07-30T18:14:10Z")

</div>

I have the T4 manual as well. I’ll see if I can cross reference and make sense of it. Thanks!

---

<div class="post-metadata">

**Author:** ![2002](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/2002/32/2623_2.png) [@2002](https://community.electricforum.com/u/2002)\
**Post date:** [August 7, 2018, 1:42pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/26 "2018-08-07T13:42:05Z")

</div>

Mr Vern, any luck cross referencing those specifically named T4 regen settings to the T1 electrical engineer settings?

Thanks

M@

---

<div class="post-metadata">

**Author:** ![Mr.Vern](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mr.vern/32/2658_2.png) [@Mr.Vern](https://community.electricforum.com/u/Mr.Vern)\
**Post date:** [August 7, 2018, 8:56pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/27 "2018-08-07T20:56:43Z")

</div>

@2002, I had forgotten. Sorry about that.  
It looks like 19 is the same T1 calls it FIELD CURRENT RAMP RATE DURING REGEN/PLUGGING, T4 calls it PEDAL DOWN OR BRAKE REGEN RATE.  
20 looks different: T1 MPH/KPH OVER SPEED LIMIT, T4 PEDAL UP REGEN RATE  
21 - T1 ARMATURE CURRENT RAMP DURING REGEN, T4 TOP SPEED REGULATION POINT  
It looks like the T1 and T4 have flipped Functions 20 and 21 from each other.  
If you send me your email address, I will send you both manuals. I set 19 to 1 and I’m not getting the effect I wanted. It has made the regen harsh again which is what prompted me to get the programmer in the first place. I’m going to play with softening it a bit and see if I like it.

---

<div class="post-metadata">

**Author:** ![Tyson\_Davis](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tyson_davis/32/719_2.png) [@Tyson\_Davis](https://community.electricforum.com/u/Tyson_Davis)\
**Post date:** [April 24, 2019, 6:23pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/28 "2019-04-24T18:23:35Z")

</div>

Just found this… I have a 2002 T1 controller and did the Lithium Bolt conversation, I have a older Ride for Fun motor as well. I am looking for Higher Regain on peddle lift. I have a Handset to change the codes. @Mr.Vern what setting did you find was good for you. I was going to do some testing this weekend but wanted to do my homework before I started playing.

Thanks

---

<div class="post-metadata">

**Author:** ![Tyson\_Davis](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tyson_davis/32/719_2.png) [@Tyson\_Davis](https://community.electricforum.com/u/Tyson_Davis)\
**Post date:** [April 28, 2019, 6:35pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/29 "2019-04-28T18:35:23Z")

</div>

I set 19 to 1 and 20 to 1, I get a little regain on lift but not enough to slow me down without having to break. Any thoughts on other settings?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [April 28, 2019, 6:45pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/30 "2019-04-28T18:45:56Z")

</div>

Seems you want the rate one direction and the level the other.

---

<div class="post-metadata">

**Author:** ![Tyson\_Davis](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tyson_davis/32/719_2.png) [@Tyson\_Davis](https://community.electricforum.com/u/Tyson_Davis)\
**Post date:** [April 28, 2019, 8:49pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/31 "2019-04-28T20:49:31Z")

</div>

Any thoughts? I am lost as to adjust.

---

<div class="post-metadata">

**Author:** ![Mr.Vern](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mr.vern/32/2658_2.png) [@Mr.Vern](https://community.electricforum.com/u/Mr.Vern)\
**Post date:** [May 2, 2019, 5:10pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/32 "2019-05-02T17:10:12Z")

</div>

Sorry for the delayed response, I’ve been traveling a lot. I believe I set my Function 9 to 255 for max braking. It is a bit too much on the hills in my community and I drop below 25MPH. I would start at max and keep playing with it to find the balance you like. I believe I set Function 21 near 20 for a smooth engagement of the regen. Anything less than that and it violently engages when lifting off the pedal. You will need to adjust this as you adjust the amount of braking to find what works best for you. Hope this helps.

---

<div class="post-metadata">

**Author:** ![Tyson\_Davis](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tyson_davis/32/719_2.png) [@Tyson\_Davis](https://community.electricforum.com/u/Tyson_Davis)\
**Post date:** [May 2, 2019, 5:58pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/33 "2019-05-02T17:58:42Z")

</div>

Thanks so much for getting back with me. I will try these settings and let you know what I find out…

---

<div class="post-metadata">

**Author:** ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)\
**Post date:** [May 2, 2019, 9:05pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/34 "2019-05-02T21:05:43Z")

</div>

on a t5 #9 - 255  
#19 & #20 set to 50

It also depends on your trans gear ratio and your overall tire size .

---

<div class="post-metadata">

**Author:** ![Tyson\_Davis](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tyson_davis/32/719_2.png) [@Tyson\_Davis](https://community.electricforum.com/u/Tyson_Davis)\
**Post date:** [May 2, 2019, 9:21pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/35 "2019-05-02T21:21:08Z")

</div>

I have T1. With 12 inch gem tires and 8:1 gears. I tried 9 at 250 and 21 to 20 and 19 to 1 and still nothing. I believe 19 and 21 are the same as 19 and 20 on t5 if I read correctly. I will try your settings now

Thanks

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [May 2, 2019, 10:12pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/36 "2019-05-02T22:12:23Z")

</div>

What about 10?  
 ![image](https://canada1.discourse-cdn.com/flex030/uploads/electricforum/original/2X/2/2274c22a04636a6dd7d65fb845ffdf7bd70075ea.png)

---

<div class="post-metadata">

**Author:** ![Mr.Vern](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mr.vern/32/2658_2.png) [@Mr.Vern](https://community.electricforum.com/u/Mr.Vern)\
**Post date:** [May 3, 2019, 3:51am UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/37 "2019-05-03T03:51:54Z")

</div>

I haven’t messed with the field current on the regen. I’m not really sure how that affects it and fear that it might generate excess heat. I believe the armature current is what recharges the batteries so messing with the field is a big question for me. I’ve been able to tune all I want using armature and can definitely see my batteries charging. That’s one of the beauties of the lithium, they can actually store the high current going to them unlike the lead ones which can’t store most of it and the energy is lost as heat.

---

<div class="post-metadata">

**Author:** ![Tyson\_Davis](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tyson_davis/32/719_2.png) [@Tyson\_Davis](https://community.electricforum.com/u/Tyson_Davis)\
**Post date:** [May 3, 2019, 2:21pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/38 "2019-05-03T14:21:59Z")

</div>

The Rain Started yesterday and has not quit, so I am going to try again this weekend. I am worried that since I have a T1 Contoller that I might be pushing the AMPS on that Controller a little to much if I turn up 9 and 10 that high… I don’t want it to over heat and then I am stuck with error codes.

---

<div class="post-metadata">

**Author:** ![Tyson\_Davis](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/tyson_davis/32/719_2.png) [@Tyson\_Davis](https://community.electricforum.com/u/Tyson_Davis)\
**Post date:** [May 6, 2019, 4:14pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/39 "2019-05-06T16:14:07Z")

</div>

Well I did some more testing. and still no reiterative breaking… I had 9 set to 250, 19 set to 50 and 21 set to 50. I went down a hill doing 25 and lifted my food and nothing. Felt like I will slowing down a little but nothing like I wanted… so I set everything back to where it was before I started and figure I should just purchase disk breaks here sometime soon.

---

<div class="post-metadata">

**Author:** ![Reddevil](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/reddevil/32/6128_2.png) [@Reddevil](https://community.electricforum.com/u/Reddevil)\
**Post date:** [May 6, 2019, 6:03pm UTC](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960/40 "2019-05-06T18:03:52Z")

</div>

You definitely should go for disc brakes. All the difference in the world in confidence of stopping.

[Previous page](https://community.electricforum.com/t/2002-e825-ge-sentry-regenerative-braking-question/13960.md?page=1)
