# 2002 e825 4seat sticky brake pedal

**URL:** <https://community.electricforum.com/t/2002-e825-4seat-sticky-brake-pedal/27220>\
**Category:** GEM Forum\
**Created:** [December 2, 2023, 4:12am UTC](https://community.electricforum.com/t/2002-e825-4seat-sticky-brake-pedal/27220 "2023-12-02T04:12:55Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [December 2, 2023, 6:52am UTC](https://community.electricforum.com/t/2002-e825-4seat-sticky-brake-pedal/27220/2 "2023-12-02T06:52:15Z")

</div>

Some have solved this problem by pulling the brake pivot pin, cleaning it up a bit, then putting it back together with a bit of lube.

Gem solved the problem in later years by adding a spring. Here is a thread where it was discussed with plenty of pretty pictures and diagrams.

> [@2005 e4 Brake Pedal Adjustment](https://community.electricforum.com/t/2005-e4-brake-pedal-adjustment/21072):
>
> Hey Everyone. Need some assistance in adjusting my brake pedal. I’ve noticed that sometimes my brake lights stay on. I get them to turn off by placing my foot below the brake pedal and pulling up on it. I figured I just needed to adjust the brake switch. After poking around my car and reading over the service manual, I discovered that the switch at the top of the brake pedal is not the brake light switch. In the service manual it is labeled “Switch-Regenerative Brake”. I’ve confirmed that …

---

_[View the full topic](https://community.electricforum.com/t/2002-e825-4seat-sticky-brake-pedal/27220)._
