# 2002 DOA in San Diego after pothole hit

**URL:** <https://community.electricforum.com/t/2002-doa-in-san-diego-after-pothole-hit/23450>\
**Category:** GEM Forum\
**Created:** [February 5, 2022, 8:42pm UTC](https://community.electricforum.com/t/2002-doa-in-san-diego-after-pothole-hit/23450 "2022-02-05T20:42:11Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [February 5, 2022, 10:51pm UTC](https://community.electricforum.com/t/2002-doa-in-san-diego-after-pothole-hit/23450/7 "2022-02-05T22:51:30Z")

</div>

I found this old thread and need to walk through it once I get the vehicle in the driveway…

> [@Gem won't start. Need help!](https://community.electricforum.com/t/gem-wont-start-need-help/21659/25):
>
> Wow, thanks everyone for your help. I think Bundcur is unto something. I received the schematic from AssyRequired (Thanks!) and was using it to trace out the low current 72V system through the PWB, I now know the 72v signal from the keyswitch is not getting through the timer relay to the main relay. The timer relay is signaling the key is on to the “main relay” as someone called it. This is a 12v relay that takes the constant 72v and powers the GRY/WHT wire to the motor controller.

---

_[View the full topic](https://community.electricforum.com/t/2002-doa-in-san-diego-after-pothole-hit/23450)._
