# 2002 DOA in San Diego after pothole hit

**URL:** <https://community.electricforum.com/t/2002-doa-in-san-diego-after-pothole-hit/23450>\
**Category:** GEM Forum\
**Created:** [February 5, 2022, 8:42pm UTC](https://community.electricforum.com/t/2002-doa-in-san-diego-after-pothole-hit/23450 "2022-02-05T20:42:11Z")\
**Posts on this page:** 1\
**Showing post:** 18

<div class="post-metadata">

**Author:** ![dougl](https://avatars.discourse-cdn.com/v4/letter/d/b19c9b/32.png) [@dougl](https://community.electricforum.com/u/dougl)\
**Post date:** [February 6, 2022, 7:35pm UTC](https://community.electricforum.com/t/2002-doa-in-san-diego-after-pothole-hit/23450/18 "2022-02-06T19:35:22Z")

</div>

@Inwo posted that P1 and P2 are key to waking up the controller:

> [@Gem won't start. Need help!](https://community.electricforum.com/t/gem-wont-start-need-help/21659/26):
>
> Controller needs B+ on p1 and p2 to turn on. If nothing else work connect them together, hot wire. P1 is always on p2 is indirectly through key, timer, and charger interlock.

And I checked, my P1 is always at 81V and P2 goes to 81V when the key is turned On.  
Is there anything else which would cause the controller to not turn on?

---

_[View the full topic](https://community.electricforum.com/t/2002-doa-in-san-diego-after-pothole-hit/23450)._
