# 2000 GEM E-825 Changed batts, now won't go

**URL:** <https://community.electricforum.com/t/2000-gem-e-825-changed-batts-now-wont-go/4454>\
**Category:** GEM Forum\
**Created:** [September 19, 2014, 12:14am UTC](https://community.electricforum.com/t/2000-gem-e-825-changed-batts-now-wont-go/4454 "2014-09-19T00:14:26Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![usb24h](https://avatars.discourse-cdn.com/v4/letter/u/f1d935/32.png) [@usb24h](https://community.electricforum.com/u/usb24h)\
**Post date:** [September 19, 2014, 12:14am UTC](https://community.electricforum.com/t/2000-gem-e-825-changed-batts-now-wont-go/4454/1 "2014-09-19T00:14:26Z")

</div>

Put in two new 12v batts (front). Now when the key is on, and the brake on, -109 shows on charge status. With brake off charge shows 225, not 100! Any advice? Thanks. Won’t go forward, or reverse.

---

<div class="post-metadata">

**Author:** ![GEMmechanic](https://avatars.discourse-cdn.com/v4/letter/g/ecccb3/32.png) [@GEMmechanic](https://community.electricforum.com/u/GEMmechanic)\
**Post date:** [September 21, 2014, 3:10pm UTC](https://community.electricforum.com/t/2000-gem-e-825-changed-batts-now-wont-go/4454/2 "2014-09-21T15:10:09Z")

</div>

Try opening and then closing the master switch under the seat. Did you get the polarity correct on the batteries?
