# 2000 E825 4 seater flashing all 0's then no power

**URL:** <https://community.electricforum.com/t/2000-e825-4-seater-flashing-all-0s-then-no-power/18149>\
**Category:** GEM Forum\
**Created:** [February 25, 2020, 12:59pm UTC](https://community.electricforum.com/t/2000-e825-4-seater-flashing-all-0s-then-no-power/18149 "2020-02-25T12:59:44Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![2000GEM](https://avatars.discourse-cdn.com/v4/letter/2/8baadc/32.png) [@2000GEM](https://community.electricforum.com/u/2000GEM)\
**Post date:** [February 25, 2020, 12:59pm UTC](https://community.electricforum.com/t/2000-e825-4-seater-flashing-all-0s-then-no-power/18149/1 "2020-02-25T12:59:44Z")

</div>

I have a 2000 E825 4 seater. We left for a week on vacay, I charged the cart and turned off the battery switch before we left. Cart was fine then. When we returned, I turned on the battery switch and no power.

A GEM mechanic came out and traced the power and all good to the controller. Found a split wire that may have shorted the controller.(controller definitely had a burnt smell inside when I checked it).

So had the T1 controller rebuilt. Reinstalled it correctly (labeled all wiring prior to removing it). Turned on battery switch. When I turn the ignition key the display flashes all 0’s then goes blank.

Any thoughts? My electrical skill level is basic to novice. I have voltmeters but am never sure I am using them correctly. I am pretty handy in most other areas requiring tools and such so am not afraid to try pretty much anything.