# 20 amp fuse for horn, emergency flasher and brake lights

**URL:** https://community.electricforum.com/t/20-amp-fuse-for-horn-emergency-flasher-and-brake-lights/19872
**Category:** Ford NEVs
**Created:** [September 19, 2020, 6:31pm UTC](https://community.electricforum.com/t/20-amp-fuse-for-horn-emergency-flasher-and-brake-lights/19872 "2020-09-19T18:31:45Z")
**Posts on this page:** 5
**Page:** 1

<div class="post-metadata">

### Author: ![raylongo](https://avatars.discourse-cdn.com/v4/letter/r/e8c25b/32.png) [@raylongo](https://community.electricforum.com/u/raylongo)
#### Post date: [September 19, 2020, 6:31pm UTC](https://community.electricforum.com/t/20-amp-fuse-for-horn-emergency-flasher-and-brake-lights/19872/1 "2020-09-19T18:31:45Z")

</div>

I have looked all over and can not find this fuse. It is not one of the 3 under the seat as they all test good. Wiring schematic shows it in the circuit for the above but I can not locate it. Any help (with picture) would be gratefully appreciated. Thanks.

---

<div class="post-metadata">

### Author: ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)
#### Post date: [October 1, 2020, 1:55pm UTC](https://community.electricforum.com/t/20-amp-fuse-for-horn-emergency-flasher-and-brake-lights/19872/3 "2020-10-01T13:55:33Z")

</div>

The fuse is under the hood towards the back. If you need a copy of the service manual send me your email.

---

<div class="post-metadata">

### Author: ![raylongo](https://avatars.discourse-cdn.com/v4/letter/r/e8c25b/32.png) [@raylongo](https://community.electricforum.com/u/raylongo)
#### Post date: [October 1, 2020, 3:43pm UTC](https://community.electricforum.com/t/20-amp-fuse-for-horn-emergency-flasher-and-brake-lights/19872/4 "2020-10-01T15:43:36Z")

</div>

Dave, thanks  
[ray90740@gmail.com](mailto:ray90740@gmail.com)

---

<div class="post-metadata">

### Author: ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)
#### Post date: [October 1, 2020, 5:07pm UTC](https://community.electricforum.com/t/20-amp-fuse-for-horn-emergency-flasher-and-brake-lights/19872/5 "2020-10-01T17:07:25Z")

</div>

> [@raylongo](#):
>
> [ray90740@gmail.com](mailto:ray90740@gmail.com)

Sent, let me know if it doesn’t show up.

---

<div class="post-metadata">

### Author: ![David\_Illingworth](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/david_illingworth/32/2671_2.png) [@David\_Illingworth](https://community.electricforum.com/u/David_Illingworth)
#### Post date: [October 1, 2020, 5:19pm UTC](https://community.electricforum.com/t/20-amp-fuse-for-horn-emergency-flasher-and-brake-lights/19872/6 "2020-10-01T17:19:22Z")

</div>

I have found several mistakes in the manual. Mostly in the pinpoint tests where the result will tell you to replace a part but it’s incorrect. Luckily I’ve been in the industry for many years and realized the manual was wrong before buying the parts. It’s mostly common sense but ask before buying a part if you’re unsure.
