# 1999 gem motor

**URL:** https://community.electricforum.com/t/1999-gem-motor/5448
**Category:** GEM Forum
**Created:** [October 17, 2015, 2:03pm UTC](https://community.electricforum.com/t/1999-gem-motor/5448 "2015-10-17T14:03:47Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![hsand53](https://avatars.discourse-cdn.com/v4/letter/h/ecb155/32.png) [@hsand53](https://community.electricforum.com/u/hsand53)
#### Post date: [October 17, 2015, 2:03pm UTC](https://community.electricforum.com/t/1999-gem-motor/5448/1 "2015-10-17T14:03:47Z")

</div>

I’m having trouble separating the motor from thedifferential watched utube looked easy, any thoughts would be appreciated,

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [October 17, 2015, 6:01pm UTC](https://community.electricforum.com/t/1999-gem-motor/5448/2 "2015-10-17T18:01:35Z")

</div>

If it is really stuck remove the 2 screws in the back of the motor and pull the housing off. You will then be able to get at the joint and pry it apart.

---

<div class="post-metadata">

### Author: ![hsand53](https://avatars.discourse-cdn.com/v4/letter/h/ecb155/32.png) [@hsand53](https://community.electricforum.com/u/hsand53)
#### Post date: [October 19, 2015, 4:55pm UTC](https://community.electricforum.com/t/1999-gem-motor/5448/3 "2015-10-19T16:55:03Z")

</div>

that’s what I thought, thanks from Harry