# 1999-2004 King Pins

**URL:** <https://community.electricforum.com/t/1999-2004-king-pins/18044>\
**Category:** Do It Yourself (DIY)\
**Created:** [February 6, 2020, 11:40pm UTC](https://community.electricforum.com/t/1999-2004-king-pins/18044 "2020-02-06T23:40:19Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Todd](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/todd/32/1061_2.png) [@Todd](https://community.electricforum.com/u/Todd)\
**Post date:** [February 6, 2020, 11:40pm UTC](https://community.electricforum.com/t/1999-2004-king-pins/18044/1 "2020-02-06T23:40:19Z")

</div>

Has anybody replaced their King Pins (ball joints) themselves, rather than paying a couple hundred bucks for a vendor to do it? What is the part number of the king pins?

---

<div class="post-metadata">

**Author:** ![bundcur](https://avatars.discourse-cdn.com/v4/letter/b/85f322/32.png) [@bundcur](https://community.electricforum.com/u/bundcur)\
**Post date:** [February 7, 2020, 5:57am UTC](https://community.electricforum.com/t/1999-2004-king-pins/18044/2 "2020-02-07T05:57:40Z")

</div>

I have not but I will have both left and right for sale within two weeks (The cart has 1260 miles on it). Make me a offer and I will sell them to you cheap. I am in the process of swapping the entire front end off my 2000 and installing a 2014 front end. I am also planning on replacing rear suspension with the 2014 4-bar rear end.

---

<div class="post-metadata">

**Author:** ![Wcolby](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/wcolby/32/3200_2.png) [@Wcolby](https://community.electricforum.com/u/Wcolby)\
**Post date:** [February 11, 2020, 7:07pm UTC](https://community.electricforum.com/t/1999-2004-king-pins/18044/3 "2020-02-11T19:07:26Z")

</div>

I have done it. The Thing Shop / NEV accessories sells the rebuilt / new kingpins, they are not listed on their website for pre- 2005 but they carry them.

---

<div class="post-metadata">

**Author:** ![Todd](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/todd/32/1061_2.png) [@Todd](https://community.electricforum.com/u/Todd)\
**Post date:** [March 3, 2020, 7:30pm UTC](https://community.electricforum.com/t/1999-2004-king-pins/18044/4 "2020-03-03T19:30:12Z")

</div>

The individual ball joints? Or ball joints already installed in the casting?

---

<div class="post-metadata">

**Author:** ![Wcolby](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/wcolby/32/3200_2.png) [@Wcolby](https://community.electricforum.com/u/Wcolby)\
**Post date:** [March 22, 2020, 9:05am UTC](https://community.electricforum.com/t/1999-2004-king-pins/18044/5 "2020-03-22T09:05:42Z")

</div>

I have purchased them in both formats, I’m a bit of a “special” customer so I recommend just calling them to see what’s available.