# 12v Issues and no go

**URL:** <https://community.electricforum.com/t/12v-issues-and-no-go/14210>\
**Category:** GEM Forum\
**Created:** [August 1, 2018, 1:46am UTC](https://community.electricforum.com/t/12v-issues-and-no-go/14210 "2018-08-01T01:46:47Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![kane](https://avatars.discourse-cdn.com/v4/letter/k/76d3ee/32.png) [@kane](https://community.electricforum.com/u/kane)\
**Post date:** [August 1, 2018, 1:46am UTC](https://community.electricforum.com/t/12v-issues-and-no-go/14210/1 "2018-08-01T01:46:47Z")

</div>

Hi to All!  
I have a 1999 Gem and have a couple issues. I noticed my lights, wipers, directionals and basically all options were not working. When I took it apart to look into it, it then wouldn’t do anything. I noticed if I removed the Black wire on the Solid State Timer/Relay I get all my options back but still no Click noise and no power. I jumped the white and gray wire from CIT Relay and it clicks and goes! So…what do you think my issue could be?  
Thanks in advance!  
Mike

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [August 1, 2018, 1:48am UTC](https://community.electricforum.com/t/12v-issues-and-no-go/14210/2 "2018-08-01T01:48:46Z")

</div>

The charger interlock circuit maybe?

---

<div class="post-metadata">

**Author:** ![kane](https://avatars.discourse-cdn.com/v4/letter/k/76d3ee/32.png) [@kane](https://community.electricforum.com/u/kane)\
**Post date:** [August 1, 2018, 1:49am UTC](https://community.electricforum.com/t/12v-issues-and-no-go/14210/3 "2018-08-01T01:49:57Z")

</div>

Thanks for the reply. Where would I find that?

---

<div class="post-metadata">

**Author:** ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)\
**Post date:** [August 1, 2018, 2:08am UTC](https://community.electricforum.com/t/12v-issues-and-no-go/14210/4 "2018-08-01T02:08:40Z")

</div>

I believe the 12v circuit runs through the charger. When connected to a.c., the charger opens the circuit, inhibiting operation, by removing 12v.