# 12 volt capacity for Gem 2016-2019

**URL:** https://community.electricforum.com/t/12-volt-capacity-for-gem-2016-2019/24962
**Category:** GEM Forum
**Created:** [August 21, 2022, 10:04pm UTC](https://community.electricforum.com/t/12-volt-capacity-for-gem-2016-2019/24962 "2022-08-21T22:04:33Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![MrAir1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mrair1/32/12745_2.png) [@MrAir1](https://community.electricforum.com/u/MrAir1)
#### Post date: [August 21, 2022, 10:04pm UTC](https://community.electricforum.com/t/12-volt-capacity-for-gem-2016-2019/24962/1 "2022-08-21T22:04:33Z")

</div>

Adding 12 volt accessories to a GEM uses amperage that is supplied by the dc/dc converter. I am wondering what is the max. amperage that can be expected for that converter?

When adding a massive radio system is it best to have a separate high voltage to 12 v. dc/dc converter connected to the main battery pack?

My current system will all lights and radio can get close to 40 amps.  
I have stayed way below this because I don’t know what my limit is.  
Adding radio amplifiers will make this worse.

I do not see this answer in the Service Manual. If you do please tell me the page.

---

<div class="post-metadata">

### Author: ![MikeKC](https://avatars.discourse-cdn.com/v4/letter/m/90ced4/32.png) [@MikeKC](https://community.electricforum.com/u/MikeKC)
#### Post date: [August 21, 2022, 10:17pm UTC](https://community.electricforum.com/t/12-volt-capacity-for-gem-2016-2019/24962/2 "2022-08-21T22:17:20Z")

</div>

I don’t know that I would push the Delta Q to 30amps continuous but they state you can.  
I personally would install a second DC/DC converter for the stereo.

| **DC Output** | **48 VDC** | **72 VDC** |
| --- | --- | --- |
| Maximum DC output power | 1000 W | 1000 W |
| Maximum DC output current | 18 A | 12 A |
| — | | |
| **Converter DC Output** | | |
| No-load power draw | \< 0.7 W | \< 0.7 W |
| Battery DC input voltage range | 35-87 V | 50-130 V |
| DC output voltage | 13.5 +/- 0.7V | |
| Continuous / peak output current | 30 A / 60 A | |

---

<div class="post-metadata">

### Author: ![Inwo](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/inwo/32/1067_2.png) [@Inwo](https://community.electricforum.com/u/Inwo)
#### Post date: [August 21, 2022, 10:43pm UTC](https://community.electricforum.com/t/12-volt-capacity-for-gem-2016-2019/24962/3 "2022-08-21T22:43:29Z")

</div>

300 watts or 300/14 amps.  
Buffered by the parallel connected aux battery.  
No reason you could not use a larger battery or converter.  
Or add one for accessories.

---

<div class="post-metadata">

### Author: ![MrAir1](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/mrair1/32/12745_2.png) [@MrAir1](https://community.electricforum.com/u/MrAir1)
#### Post date: [August 22, 2022, 8:04pm UTC](https://community.electricforum.com/t/12-volt-capacity-for-gem-2016-2019/24962/4 "2022-08-22T20:04:23Z")

</div>

Thank you all for this data. It is easy to add an additional dc/dc converter to protect the onboard system.

---

<div class="post-metadata">

### Author: ![Rixpix](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/rixpix/32/932_2.png) [@Rixpix](https://community.electricforum.com/u/Rixpix)
#### Post date: [August 28, 2022, 7:34pm UTC](https://community.electricforum.com/t/12-volt-capacity-for-gem-2016-2019/24962/5 "2022-08-28T19:34:52Z")

</div>

Could you tell me which wires to connect the second converter to so that the ignition shuts off all power?

---

<div class="post-metadata">

### Author: ![LithiumGods](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/lithiumgods/32/672_2.png) [@LithiumGods](https://community.electricforum.com/u/LithiumGods)
#### Post date: [August 29, 2022, 12:39am UTC](https://community.electricforum.com/t/12-volt-capacity-for-gem-2016-2019/24962/6 "2022-08-29T00:39:02Z")

</div>

If your Gem has a stand alone Dc converter, You can add a second converter by switching to a Deltaq with a built in dc converter.
