# 07 gem with code 82 **URL:** \ **Category:** Introduce yourself\ **Created:** [April 16, 2015, 4:37pm UTC](https://community.electricforum.com/t/07-gem-with-code-82/4907 "2015-04-16T16:37:49Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Cambronh](https://avatars.discourse-cdn.com/v4/letter/c/898d66/32.png) [@Cambronh](https://community.electricforum.com/u/Cambronh)\ **Post date:** [April 16, 2015, 4:37pm UTC](https://community.electricforum.com/t/07-gem-with-code-82/4907/1 "2015-04-16T16:37:49Z")
Hello, I have a 2007 gem e2 with a code 82, would a speed sensor magnet that’s cracked cause this? Also, the vehicle drives but it shows no mph on display & it cuts. Thanks, Bert ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [April 16, 2015, 9:27pm UTC](https://community.electricforum.com/t/07-gem-with-code-82/4907/2 "2015-04-16T21:27:43Z")
Code 82 is an overcurrent problem. If you get heavy over current for 3 1/2 seconds it will cut out and display this code. Do you have oversize wheels and have this happen under severe driving loads? No MPH can be a busted magnet or failed sensor. ---
**Author:** ![Cambronh](https://avatars.discourse-cdn.com/v4/letter/c/898d66/32.png) [@Cambronh](https://community.electricforum.com/u/Cambronh)\ **Post date:** [April 17, 2015, 8:24pm UTC](https://community.electricforum.com/t/07-gem-with-code-82/4907/3 "2015-04-17T20:24:07Z")
Thanks for the reply, I don’t have oversized wheels and the problem occurred under normal operating conditions. I’m going to replace the speed sensor magnet since it is cracked and also the speed sensor for good measure. What causes an over current problem. The motor? ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [April 18, 2015, 6:02am UTC](https://community.electricforum.com/t/07-gem-with-code-82/4907/4 "2015-04-18T06:02:02Z")
Motor full of oil due to leakage of transmission oil is one way. ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [April 18, 2015, 6:20pm UTC](https://community.electricforum.com/t/07-gem-with-code-82/4907/5 "2015-04-18T18:20:52Z")
Did more reading on this. A bad tach sensor or busted magnet COULD be the cause of your problem. ---
**Author:** ![Cambronh](https://avatars.discourse-cdn.com/v4/letter/c/898d66/32.png) [@Cambronh](https://community.electricforum.com/u/Cambronh)\ **Post date:** [June 16, 2015, 12:02pm UTC](https://community.electricforum.com/t/07-gem-with-code-82/4907/6 "2015-06-16T12:02:31Z")
Hello, so the speed sensor and magnet fix my problem, thank you for all the help, Bert ---
**Author:** ![minglis](https://avatars.discourse-cdn.com/v4/letter/m/9de053/32.png) [@minglis](https://community.electricforum.com/u/minglis)\ **Post date:** [May 18, 2016, 1:08pm UTC](https://community.electricforum.com/t/07-gem-with-code-82/4907/7 "2016-05-18T13:08:59Z")
Where do you get parts? I need to try to replace my speed sensor. A local GEM mechanic told me you had to replace the whole motor. Doesn’t sound like that’s the case. thanks ---
**Author:** ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)\ **Post date:** [May 18, 2016, 2:49pm UTC](https://community.electricforum.com/t/07-gem-with-code-82/4907/8 "2016-05-18T14:49:48Z")
Ebay has them