# 02 E825 constant buzzer alarm

**URL:** https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463
**Category:** GEM Forum
**Created:** [October 20, 2015, 5:01pm UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463 "2015-10-20T17:01:37Z")
**Posts on this page:** 11
**Page:** 1

<div class="post-metadata">

### Author: ![djinva](https://avatars.discourse-cdn.com/v4/letter/d/34f0e0/32.png) [@djinva](https://community.electricforum.com/u/djinva)
#### Post date: [October 20, 2015, 5:01pm UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/1 "2015-10-20T17:01:37Z")

</div>

Hello

I have an 02 GEM E825 that I have owned for years. It runs fine but it has a constant alarm or buzzer. It won’t quit even if you turn the key off and take it out of the ignition. I have to turn the main switch to the off position to get it to stop.

Any ideas?

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [October 20, 2015, 5:34pm UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/2 "2015-10-20T17:34:06Z")

</div>

Faulty parking brake switch

---

<div class="post-metadata">

### Author: ![djinva](https://avatars.discourse-cdn.com/v4/letter/d/34f0e0/32.png) [@djinva](https://community.electricforum.com/u/djinva)
#### Post date: [October 21, 2015, 8:05am UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/3 "2015-10-21T08:05:29Z")

</div>

> [@OLD HOUSEBOATER;26829](#):
>
> Faulty parking brake switch

Can I simply disconnect the alarm?

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [October 21, 2015, 8:52am UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/4 "2015-10-21T08:52:38Z")

</div>

Yes you can

---

<div class="post-metadata">

### Author: ![Jcbellis](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@Jcbellis](https://community.electricforum.com/u/Jcbellis)
#### Post date: [July 27, 2021, 2:16pm UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/5 "2021-07-27T14:16:33Z")

</div>

How can you disconnect the alarm?

---

<div class="post-metadata">

### Author: ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)
#### Post date: [July 27, 2021, 2:45pm UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/6 "2021-07-27T14:45:13Z")

</div>

A 4lb engineers hammer works beautifully…

> [@Magic Magnet](https://community.electricforum.com/t/magic-magnet/21833/1):
>
> Hi Dave, I just purchased a 2006 e2

Eh… So on the 99-04 years, the buzzer was an independent device under the dash that you could simply unplug. On your 06, it’s a component part of the PSDM board (the circuit board with all the fuses on it). Disconnecting it would require desoldering of the component. Best bet for simplicity if you don’t have the tools or experience with that is to gag it. You’ll have to take the dash apart and look on the board for a black cylinder about the diameter of a dime and about 1/2" tall with a hole in the top. Find it and put a piece or two of foam tape over the hole.

Or, there is that hammer…

---

<div class="post-metadata">

### Author: ![Old\_Houseboater](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/old_houseboater/32/544_2.png) [@Old\_Houseboater](https://community.electricforum.com/u/Old_Houseboater)
#### Post date: [July 27, 2021, 2:48pm UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/7 "2021-07-27T14:48:43Z")

</div>

This is a safety feature to protect pedestrians. Why do you want to disconnect it?

---

<div class="post-metadata">

### Author: ![Dlish89](https://avatars.discourse-cdn.com/v4/letter/d/48db29/32.png) [@Dlish89](https://community.electricforum.com/u/Dlish89)
#### Post date: [July 27, 2021, 2:56pm UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/8 "2021-07-27T14:56:38Z")

</div>

do you have a -04 displayed on the gauge?

---

<div class="post-metadata">

### Author: ![Jcbellis](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@Jcbellis](https://community.electricforum.com/u/Jcbellis)
#### Post date: [July 27, 2021, 3:03pm UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/9 "2021-07-27T15:03:21Z")

</div>

Keep from waking up my neighbors when I leave at 5:30 in the morning.

---

<div class="post-metadata">

### Author: ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)
#### Post date: [July 27, 2021, 9:09pm UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/10 "2021-07-27T21:09:33Z")

</div>

Jcbellis - Sounds like you are trying to silence your reverse beeper?

What year is your car?

---

<div class="post-metadata">

### Author: ![JarJarJava](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/jarjarjava/32/15158_2.png) [@JarJarJava](https://community.electricforum.com/u/JarJarJava)
#### Post date: [July 28, 2021, 12:49am UTC](https://community.electricforum.com/t/02-e825-constant-buzzer-alarm/5463/11 "2021-07-28T00:49:22Z")

</div>

From another thread, it sounds like it’s an 06

> [@Magic Magnet](https://community.electricforum.com/t/magic-magnet/21833/1):
>
> Hi Dave, I just purchased a 2006 e2 and I have a problem with the speed. The speedometer shows the top speed at 25 but GPS shows the speed is 19 MPH. Does you MM give me a little higher speed without changing out anything else. Thank you
