# 01 E825 NO GO just master click

**URL:** <https://community.electricforum.com/t/01-e825-no-go-just-master-click/29811>\
**Category:** GEM Forum\
**Created:** [October 16, 2025, 1:30am UTC](https://community.electricforum.com/t/01-e825-no-go-just-master-click/29811 "2025-10-16T01:30:34Z")\
**Posts on this page:** 4\
**Page:** 2

<div class="post-metadata">

**Author:** ![Rose88](https://avatars.discourse-cdn.com/v4/letter/r/8dc957/32.png) [@Rose88](https://community.electricforum.com/u/Rose88)\
**Post date:** [October 24, 2025, 5:49pm UTC](https://community.electricforum.com/t/01-e825-no-go-just-master-click/29811/21 "2025-10-24T17:49:35Z")

</div>

[![](https://img.youtube.com/vi/-NaTzVr5kQo/maxresdefault.jpg "2001 GEM E825 Gremlins") ](https://www.youtube.com/watch?v=-NaTzVr5kQo)

---

<div class="post-metadata">

**Author:** ![Rose88](https://avatars.discourse-cdn.com/v4/letter/r/8dc957/32.png) [@Rose88](https://community.electricforum.com/u/Rose88)\
**Post date:** [October 24, 2025, 6:14pm UTC](https://community.electricforum.com/t/01-e825-no-go-just-master-click/29811/22 "2025-10-24T18:14:39Z")

</div>

Ok here’s something else to add i just noticed. In turf mode no beep but when you change to road mode its a loud steady noise from alarm but goes off after solenoid clicks.

---

<div class="post-metadata">

**Author:** ![AssyRequired](https://yyz2.discourse-cdn.com/flex030/user_avatar/community.electricforum.com/assyrequired/32/7621_2.png) [@AssyRequired](https://community.electricforum.com/u/AssyRequired)\
**Post date:** [October 24, 2025, 6:49pm UTC](https://community.electricforum.com/t/01-e825-no-go-just-master-click/29811/23 "2025-10-24T18:49:49Z")

</div>

> parking microswitch. I have a green wire on top, white in middle, and yellow/green on bottom

This sounds correct. Since beep changes with brake state, I’d say this works.

====

Just to make sure we are both on the same page.  
Ref Video (above)

OK, Rev beep, switch looks like it is in REV?  
When switched to Fwd- goes to steady beep?

Then you release the brake(either direction), the beep silences, and the code -04 on the dash clears and changes to what? (before MC kicks out).

Then after MC kicks out, Is there still a code? (vid never swings back over there)

=====

> I’m at 73.1v pack and @ fuse …solenoid.

Most likely not your problem, but that pack is almost depleted. Charge it up.

---

<div class="post-metadata">

**Author:** ![Rose88](https://avatars.discourse-cdn.com/v4/letter/r/8dc957/32.png) [@Rose88](https://community.electricforum.com/u/Rose88)\
**Post date:** [October 24, 2025, 8:54pm UTC](https://community.electricforum.com/t/01-e825-no-go-just-master-click/29811/24 "2025-10-24T20:54:59Z")

</div>

Will check those on Monday and get back with result sir.. Thanks for helping me out

[Previous page](https://community.electricforum.com/t/01-e825-no-go-just-master-click/29811.md?page=1)